On Mon, Feb 12, 2018 at 6:48 AM, Joel Stanley <joel@xxxxxxxxx> wrote:
> The Nuvoton UART is almost compatible with the 8250 driver when probed
> via the 8250_of driver, however it requires some extra configuration
> at startup.
> + [PORT_NPCM] = {
> + .name = "Nuvoton 16550",
> + .fifo_size = 16,
> + .tx_loadsz = 16,
> + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
> + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
> + .rxtrig_bytes = {1, 4, 8, 14},
> + .flags = UART_CAP_FIFO,
> +
Redundant.
> + },
> + /*
> + * Nuvoton calls the scratch register 'UART_TOR' (timeout
> + * register). Enable it, and set TIOC (timeout interrupt
> + * comparator) to be 0x20 for correct operation.
> + */
> + serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
> +/* Nuvoton NPCM UARTs have a custom divisor calculation */
> + return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
Is there any link to datasheet?
> +/* Nuvoton UART */
> +#define PORT_NPCM 118
We have gaps there. #40 is perfect place for this one.
> +/* Nuvoton NPCM timeout register */
> +#define UART_NPCM_TOR 7
> +#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */
--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
