[v3] * Rebased on top of the latest PLL driver changes * Addressed comment from Rob Herring for bindings This series adds support for the CPU clocks on msm8996 devices. The driver uses the existing PLL drivers and is required to control the CPU frequency scaling on the MSM8996. A previous post of RFC can be found here https://patchwork.kernel.org/patch/10144485/ Ilia Lin (6): soc: qcom: Separate kryo l2 accessors from PMU driver clk: qcom: Add DT bindings for CPU clock driver for msm8996 clk: qcom: clk-cpu-8996: Prepare PLLs on probe clk: qcom: Add ACD path to CPU clock driver for msm8996 DT: QCOM: Add cpufreq-dt to msm8996 DT: QCOM: Add thermal mitigation to msm8996 Rajendra Nayak (4): clk: qcom: Make clk_alpha_pll_configure available to modules clk: qcom: Add CPU clock driver for msm8996 clk: qcom: cpu-8996: Add support to switch to alternate PLL clk: qcom: cpu-8996: Add support to switch below 600Mhz .../devicetree/bindings/clock/qcom,kryocc.txt | 17 + arch/arm64/Kconfig.platforms | 7 + arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 4 +- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 286 ++++++++++- drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-alpha-pll.c | 1 + drivers/clk/qcom/clk-cpu-8996.c | 554 +++++++++++++++++++++ drivers/cpufreq/cpufreq-dt-platdev.c | 3 + drivers/perf/qcom_l2_pmu.c | 50 +- drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/kryo-l2-accessors.c | 64 +++ include/soc/qcom/kryo-l2-accessors.h | 22 + 14 files changed, 956 insertions(+), 64 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,kryocc.txt create mode 100644 drivers/clk/qcom/clk-cpu-8996.c create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c create mode 100644 include/soc/qcom/kryo-l2-accessors.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
