The PLLs must be prepared enabled during the probe to be
accessible by the OPPs. Otherwise an OPP may switch
to non-enabled clock.
Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/clk-cpu-8996.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index 854f327..b0a3b73 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -15,7 +15,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-
+#include <linux/clk-provider.h>
#include "clk-alpha-pll.h"
#define VCO(a, b, c) { \
@@ -376,6 +376,18 @@ struct clk_hw_clks {
clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
+ /* Enable all PLLs and alt PLLs */
+ clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk);
+ clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk);
+ clk_prepare_enable(pwrcl_pll.clkr.hw.clk);
+ clk_prepare_enable(perfcl_pll.clkr.hw.clk);
+
+ /* Set initial boot frequencies for power/perf PLLs */
+ clk_set_rate(pwrcl_alt_pll.clkr.hw.clk, 652800000);
+ clk_set_rate(perfcl_alt_pll.clkr.hw.clk, 652800000);
+ clk_set_rate(pwrcl_pll.clkr.hw.clk, 652800000);
+ clk_set_rate(perfcl_pll.clkr.hw.clk, 652800000);
+
ret = clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
if (ret)
return ret;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
