Hi Lars,
Thanks for your review!
On 12/02/18 18:24, Lars-Peter Clausen wrote:
> On 02/12/2018 07:11 PM, Kieran Bingham wrote:
> [...]
>> + /*
>> + * The adv75xx resets its addresses to defaults during low power power
>> + * mode. Because we have two ADV7513 devices on the same bus, we must
>> + * change both of them away from the defaults so that they do not
>> + * conflict.
>> + */
>> hdmi@3d {
>> compatible = "adi,adv7513";
>> - reg = <0x3d>;
>> + reg = <0x3d 0x2d 0x4d, 0x5d>;
>
> To have the correct semantics this should be:
> reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;>
> It is a set of 4 single cell addresses. The other thing is a single 4 cell
> address. It will get compiled to the same bytes, but the DT tools should
> complain about it, because it doesn't match #address-cells.
Not to mention the spurious comma's!!! (at least I marked the patch RFT :D)
I'll resend a v2.1 RFT here, and update my local changes (with the same fault,
sans comma) to my other DT files!
Thanks for the fast review.
--
Kieran
>
>> + reg-names = "main", "cec", "edid", "packet";
>>
>> adi,input-depth = <8>;
>> adi,input-colorspace = "rgb";
>> @@ -272,7 +279,8 @@
>>
>> hdmi@39 {
>> compatible = "adi,adv7513";
>> - reg = <0x39>;
>> + reg = <0x39 0x29 0x49, 0x59>;
>
> Same here.
>
>> + reg-names = "main", "cec", "edid", "packet";
>>
>> adi,input-depth = <8>;
>> adi,input-colorspace = "rgb";
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
