On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> By following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt, it also
> let us to set timout-sec property in devicetree.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
Reviewed-by: Guenetr Roeck <linux@xxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> drivers/watchdog/meson_wdt.c | 2 +-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> index 8a6d84cb36c9..7588cc3971bf 100644
> --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> @@ -9,9 +9,13 @@ Required properties:
> "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> - reg : Specifies base physical address and size of the registers.
>
> +Optional properties:
> +- timeout-sec: contains the watchdog timeout in seconds.
> +
> Example:
>
> wdt: watchdog@c1109900 {
> compatible = "amlogic,meson6-wdt";
> reg = <0xc1109900 0x8>;
> + timeout-sec = <10>;
> };
> diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> index 304274c67735..cd0275a6cdac 100644
> --- a/drivers/watchdog/meson_wdt.c
> +++ b/drivers/watchdog/meson_wdt.c
> @@ -36,7 +36,7 @@
> #define MESON_SEC_TO_TC(s, c) ((s) * (c))
>
> static bool nowayout = WATCHDOG_NOWAYOUT;
> -static unsigned int timeout = MESON_WDT_TIMEOUT;
> +static unsigned int timeout;
>
> struct meson_wdt_data {
> unsigned int enable;
> --
> 2.15.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
