watchdog_init_timeout() will allways pick timeout_param since it
defaults to a valid timeout.
By following best practice described in
Documentation/watchdog/watchdog-kernel-api.txt, it also
let us to set timout-sec property in devicetree.
Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
---
Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
drivers/watchdog/meson_wdt.c | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
index 8a6d84cb36c9..7588cc3971bf 100644
--- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
@@ -9,9 +9,13 @@ Required properties:
"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
- reg : Specifies base physical address and size of the registers.
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
Example:
wdt: watchdog@c1109900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
+ timeout-sec = <10>;
};
diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
index 304274c67735..cd0275a6cdac 100644
--- a/drivers/watchdog/meson_wdt.c
+++ b/drivers/watchdog/meson_wdt.c
@@ -36,7 +36,7 @@
#define MESON_SEC_TO_TC(s, c) ((s) * (c))
static bool nowayout = WATCHDOG_NOWAYOUT;
-static unsigned int timeout = MESON_WDT_TIMEOUT;
+static unsigned int timeout;
struct meson_wdt_data {
unsigned int enable;
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
