Hi Ezequiel, On Fri, Jan 17, 2014 at 09:13:40AM -0300, Ezequiel Garcia wrote: > Some flashes can only be properly accessed when the ECC mode is > specified, and a way to describe such mode is required. > > Such ECC mode is completely driver-specific so instead of having one binding > per compatible-string, let's add generic ECC strength and ECC step size. > Driver's can choose the appropriate ECC mode, based on this specification. > > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mtd/nand.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt > index 03855c8..683a310 100644 > --- a/Documentation/devicetree/bindings/mtd/nand.txt > +++ b/Documentation/devicetree/bindings/mtd/nand.txt > @@ -3,5 +3,9 @@ > - nand-ecc-mode : String, operation mode of the NAND ecc mode. > Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", > "soft_bch". > +- nand-ecc-strength : integer ECC required strength. > +- nand-ecc-size : integer step size associated to the ECC strength. Probably should be nand-ecc-step-size, to be clearer. > + The exact meaning of the ECC strength and ECC size parameters is completely > + driver-specific. I think we can be much more specific than this. We need to at least describe how the strength and size are related, and we need to mention how this represents the ECC scheme to use, rather than the minimum requirement of the flash. I'd say something like this. Feel free to improve it, but it covers the gist of what I think we can say in a generic document: - nand-ecc-strength: integer representing the number of bits to correct per ECC step - nand-ecc-step-size: integer representing the number of data bytes that are covered by a single ECC step Together, the ECC strength and step size define the correction capability, so that we say we will correct "X bit errors per Y bytes". The interpretation of these parameters is implementation-defined, but they often have ramifications on the formation, interpretation, and placement of correction metadata on the flash. Not all implementations must support all possible combinations. Implementations are encouraged to further define the value(s) they support. > - nand-bus-width : 8 or 16 bus width if not present 8 > - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html