Re: [Patch v5 2/2] dmaengine: qcom_bam_dma: Add device tree binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Feb 4, 2014, at 2:42 PM, Andy Gross <agross@xxxxxxxxxxxxxx> wrote:

> Add device tree binding support for the QCOM BAM DMA driver.
> 
> Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/dma/qcom_bam_dma.txt       |   48 ++++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt

Acked-by: Kumar Gala <galak@xxxxxxxxxxxxxx>

- k

> 
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> new file mode 100644
> index 0000000..86344f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> @@ -0,0 +1,48 @@
> +QCOM BAM DMA controller
> +
> +Required properties:
> +- compatible:	Must be "qcom,bam-v1.4.0" for MSM8974 V1
> +		Must be "qcom,bam-v1.4.1" for MSM8974 V2
> +- reg: Address range for DMA registers
> +- interrupts: single interrupt for this controller
> +- #dma-cells: must be <1>
> +- clocks: required clock
> +- clock-names: name of clock
> +- qcom,ee : indicates the active Execution Environment identifier (0-7)
> +
> +Example:
> +
> +	uart-bam: dma@f9984000 = {
> +		compatible = "qcom,bam-v1.4.1";
> +		reg = <0xf9984000 0x15000>;
> +		interrupts = <0 94 0>;
> +		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> +		clock-names = "bam_clk";
> +		#dma-cells = <1>;
> +		qcom,ee = <0>;
> +	};
> +
> +Client:
> +Required properties:
> +- dmas: List of dma channel requests
> +- dma-names: Names of aforementioned requested channels
> +
> +Clients must use the format described in the dma.txt file, using a two cell
> +specifier for each channel.
> +
> +The three cells in order are:
> +  1. A phandle pointing to the DMA controller
> +  2. The channel number
> +
> +Example:
> +	serial@f991e000 {
> +		compatible = "qcom,msm-uart";
> +		reg = <0xf991e000 0x1000>
> +			<0xf9944000 0x19000>;
> +		interrupts = <0 108 0>;
> +		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
> +		clock-names = "core", "iface";
> +
> +		dmas = <&uart-bam 0>, <&uart-bam 1>;
> +		dma-names = "rx", "tx";
> +	};
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux