On Wed, Jan 31, 2018 at 08:01:12PM +0100, Pavel Machek wrote: > > This adds device tree bindings for tlv320dac33.c. > > Signed-off-by: Pavel Machek <pavel@xxxxxx> > > diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > new file mode 100644 > index 0000000..7fdda95 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > @@ -0,0 +1,32 @@ > +Texas Instruments - tlv320dac33 Codec module > + > +The tlv320dac33 serial control bus communicates through I2C protocols. > + > +Required properties: > + > +- compatible - "ti,tlv320dac33" > +- reg - I2C slave address > + > +Optional properties: > + > +- reset-gpios - gpio pin to power the device, active low > + > +- interrupts - The interrupt output from the device. > +- interrupt-parent - The parent interrupt controller. > + > +- ti,keep-bclk - Keep the BCLK running in FIFO modes space before tab ^ > +- ti,burst-bclkdiv - BCLK divider value in burst mode What are valid values? What's the default? > + > +Example: > + > +tlv320dac33: audio-codec@19 { > + compatible = "ti,tlv320dac33"; > + reg = <0x19>; > + > + interrupt-parent = <&gpio2>; > + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ > + reset-gpios = <&gpio2 28 0>; /* gpio_60 */ > + > + ti,keep-bclk; > + ti,burst-bclkdiv = <3>; > +}; > > > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html