On 2018-01-29 10:41, Sricharan R wrote:
The board has a spi-nand interface on spi0 bus chipselect1.
Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts | 25
+++++++++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..21ed56d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-ap.dk01.1-c2.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
new file mode 100644
index 0000000..e3442da
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2";
s/IPQ40xx/IPQ4019
+
+ soc {
+ spi_0: spi@78b5000 { /* BLSP1 QUP1 */
+ status = "ok";
+ cs-gpios = <&tlmm 54 0>, <&tlmm 59 0>;
the base dk01 file has pinmux for 54 only.
for 59 pin, we need to add pinmux entry also.
Thanks,
Abhishek
+ num-cs = <2>;
+
+ mt29f@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spinand,mt29f";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+ };
+
+ };
+ };
+};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
