On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
it, and turn on the regulator used for it, so that both wifi & bluetooth
work.
Verified to work on the Artik 520 evaluation board.
Signed-off-by: Michael Lyle <mlyle@xxxxxxxx>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 0aa577fe9f95..b2d441b1a7e3 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -245,6 +245,7 @@
regulator-name = "VLDO23_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo24_reg: LDO24 {
@@ -316,6 +317,41 @@
status = "okay";
};
+&pinctrl_1 {
+ wlanen: wlanen {
+ samsung,pins = "gpx2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
+ samsung,pin-val = <1>;
+ };
+};
+
+&mshc_1 {
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ broken-cd;
+ bypass-smu;
+ keep-power-in-suspend;
+ fifo-depth = <0x40>;
+ vqmmc-supply = <&ldo11_reg>;
+ /* Voltage negotiation is broken for the SDIO periph so we
+ * can't actually set the voltage here.
+ * vmmc-supply = <&ldo23_reg>;
+ */
+ card-detect-delay = <500>;
+ clock-frequency = <100000000>;
+ max-frequency = <100000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
+ bus-width = <4>;
+ status = "okay";
+};
+
&rtc {
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
