Hi Fabrizio,
On Thu, Jan 25, 2018 at 7:02 PM, Fabrizio Castro
<fabrizio.castro@xxxxxxxxxxxxxx> wrote:
> On R-Car Gen2 and RZ/G1 platforms, we use the SBAR registers to make non
> boot CPUs run a routine designed to bring up SMP and deal with hot plug.
> The value contained in the SBAR registers is not initialized by a WDT
> triggered reset, which means that after a WDT triggered reset we jump
> to the SMP bring up routine, preventing the system from executing the
> bootrom code.
Thanks for your patch!
> The purpose of this patch is to jump to the bootrom code in case of a
> WDT triggered reset, and keep the SMP functionality untouched.
> In order to tell if the code had been called due to the WDT overflowing
> we need to inspect flag WOVF from register RWTCSRA, however for this
> to work smoothly we need to make sure that RWDT clock is ON.
> Since it's not wise to interfere with the clock configuration from
> within this routine, a flag has been put in place
> (shmobile_wdt_clock_status) so that the watchdog driver can tell
> shmobile_boot_vector when the clock is ON, and therefore there is no
> need for shmobile_boot_vector to mess up with the clock registers.
>
> Bit WOVF survives a watchdog triggered reset, and it is usually cleared
> by the bootloader. Checking the MMU enable bit from register SCTLR
> allows us to make the code a little bit more robust (just in case the
> bit wasn't cleared up), as right after a reset the MMU is disabled,
> and when Linux is running the MMU is enabled. Also, accessing RWTCSRA
> physical address is safe when the MMU is down.
Checking a hardware register is indeed a better solution than my original
idea to let SMP bringup set a flag in RAM, as the former is less racy.
However, as you can probably imagine, I don't like the
shmobile_wdt_clock_status part ;-)
Isn't is sufficient to check the MMU enable bit?
However, that would precludes uClinux (do we care?).
Is there any other register/bit that's reset when the watchdog is
triggered, and always set by Linux?
> SMP bringup, CPU hot plug, and suspend to RAM work as normal.
shmobile_boot_vector is not only used for R-Car Gen2 and RZ/G1 SoCs, but
also for EMMA Mobile, SH/R-Mobile, and R-Car H1. Hence this breaks SMP
for the latter (and their build if ARCH_RENESAS=n, due to missing
shmobile_wdt_clock_status).
> Since shmobile_boot_vector has become bigger, "reg" property of nodes
> compatible with "renesas,smp-sram" now need to be set to "<0 0x64>".
This breaks backwards compatibility with old DTs declaring a too small
smp-sram area. If the area is too small, you should fallback to the old and
smaller code.
> --- a/arch/arm/mach-shmobile/headsmp.S
> +++ b/arch/arm/mach-shmobile/headsmp.S
> @@ -16,6 +16,13 @@
> #include <asm/assembler.h>
> #include <asm/memory.h>
>
> +#define RWDT_CLOCK_ON 0xdeadbeef
> +#define RWDT_CLOCK_OFF 0x00000000
> +#define SCTLR_MMU 0x01
> +#define BOOTROM_ADDRESS 0xE6340000
> +#define RWTCSRA_ADDRESS 0xE6020004
> +#define RWTCSRA_WOVF 0x10
> +
> /*
> * Reset vector for secondary CPUs.
> * This will be mapped at address 0 by SBAR register.
> @@ -24,11 +31,57 @@
> .arm
> .align 12
> ENTRY(shmobile_boot_vector)
This should become e.g. rcar_gen2_boot_vector_wdt
> +/*
> + if (SCTLR_MMU == 1)
> + goto shmobile_smp_continue;
> +*/
> + mrc p15, 0, r1, c1, c0, 0 @ r1 = SCTLR
> + and r0, r1, #SCTLR_MMU
> + cmp r0, #SCTLR_MMU
> + beq shmobile_smp_continue
> +/*
> + if (shmobile_wdt_clock_status != RWDT_CLOCK_ON)
> + goto shmobile_smp_continue;
> +*/
> + ldr r0, #shmobile_wdt_clock_status
> + ldr r1, #clock_on
> + cmp r0, r1
> + bne shmobile_smp_continue
> +
> +/*
> + if (RWTCSRA_WOVF == 0)
> + goto shmobile_smp_continue;
> +*/
> + ldr r0, rwtcsra
> + mov r1, #0
> + ldrb r1, [r0]
> + and r0, r1, #RWTCSRA_WOVF
> + cmp r0, #RWTCSRA_WOVF
> + bne shmobile_smp_continue
> +
> +/*
> + goto bootrom;
> +*/
> + ldr r0, bootrom
> + bx r0
> +
> +shmobile_smp_continue:
This should become
ENTRY(shmobile_boot_vector)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
