Re: [PATCH BUGFIX] ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lothar,

On Fri, Jan 26, 2018 at 4:25 PM, Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> wrote:
> imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> i.MX6ULL SoC which is plain wrong.
>
> Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
>
> Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx6ul-14x14-evk.dts  | 480 +-------------------------------
>  arch/arm/boot/dts/imx6ull-14x14-evk.dts |   5 +-
>  2 files changed, 5 insertions(+), 480 deletions(-)
>

I'm okay with this idea.
But where is imx6ul-14x14-evk.dtsi file?

BTW, would you help also CC all IMX related patches to linux-imx@xxxxxxx
maillist in the future?
Most NXP/FSL internal driver onwers are also in this list that can help review.

Regards
Dong Aisheng

> diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> index 18fdb08..6d720b2 100644
> --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
> @@ -9,487 +9,9 @@
>  /dts-v1/;
>
>  #include "imx6ul.dtsi"
> +#include "imx6ul-14x14-evk.dtsi"
>
>  / {
>         model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
>         compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
> -
> -       chosen {
> -               stdout-path = &uart1;
> -       };
> -
> -       memory {
> -               reg = <0x80000000 0x20000000>;
> -       };
> -
> -       backlight_display: backlight-display {
> -               compatible = "pwm-backlight";
> -               pwms = <&pwm1 0 5000000>;
> -               brightness-levels = <0 4 8 16 32 64 128 255>;
> -               default-brightness-level = <6>;
> -               status = "okay";
> -       };
> -
> -
> -       reg_sd1_vmmc: regulator-sd1-vmmc {
> -               compatible = "regulator-fixed";
> -               regulator-name = "VSD_3V3";
> -               regulator-min-microvolt = <3300000>;
> -               regulator-max-microvolt = <3300000>;
> -               gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> -               enable-active-high;
> -       };
> -
> -       sound {
> -               compatible = "simple-audio-card";
> -               simple-audio-card,name = "mx6ul-wm8960";
> -               simple-audio-card,format = "i2s";
> -               simple-audio-card,bitclock-master = <&dailink_master>;
> -               simple-audio-card,frame-master = <&dailink_master>;
> -               simple-audio-card,widgets =
> -                       "Microphone", "Mic Jack",
> -                       "Line", "Line In",
> -                       "Line", "Line Out",
> -                       "Speaker", "Speaker",
> -                       "Headphone", "Headphone Jack";
> -               simple-audio-card,routing =
> -                       "Headphone Jack", "HP_L",
> -                       "Headphone Jack", "HP_R",
> -                       "Speaker", "SPK_LP",
> -                       "Speaker", "SPK_LN",
> -                       "Speaker", "SPK_RP",
> -                       "Speaker", "SPK_RN",
> -                       "LINPUT1", "Mic Jack",
> -                       "LINPUT3", "Mic Jack",
> -                       "RINPUT1", "Mic Jack",
> -                       "RINPUT2", "Mic Jack";
> -
> -               simple-audio-card,cpu {
> -                       sound-dai = <&sai2>;
> -               };
> -
> -               dailink_master: simple-audio-card,codec {
> -                       sound-dai = <&codec>;
> -                       clocks = <&clks IMX6UL_CLK_SAI2>;
> -               };
> -       };
> -
> -       panel {
> -               compatible = "innolux,at043tn24";
> -               backlight = <&backlight_display>;
> -
> -               port {
> -                       panel_in: endpoint {
> -                               remote-endpoint = <&display_out>;
> -                       };
> -               };
> -       };
> -};
> -
> -&clks {
> -       assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> -       assigned-clock-rates = <786432000>;
> -};
> -
> -&i2c2 {
> -       clock_frequency = <100000>;
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_i2c2>;
> -       status = "okay";
> -
> -       codec: wm8960@1a {
> -               #sound-dai-cells = <0>;
> -               compatible = "wlf,wm8960";
> -               reg = <0x1a>;
> -               wlf,shared-lrclk;
> -       };
> -};
> -
> -&fec1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_enet1>;
> -       phy-mode = "rmii";
> -       phy-handle = <&ethphy0>;
> -       status = "okay";
> -};
> -
> -&fec2 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_enet2>;
> -       phy-mode = "rmii";
> -       phy-handle = <&ethphy1>;
> -       status = "okay";
> -
> -       mdio {
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -
> -               ethphy0: ethernet-phy@2 {
> -                       reg = <2>;
> -                       micrel,led-mode = <1>;
> -                       clocks = <&clks IMX6UL_CLK_ENET_REF>;
> -                       clock-names = "rmii-ref";
> -               };
> -
> -               ethphy1: ethernet-phy@1 {
> -                       reg = <1>;
> -                       micrel,led-mode = <1>;
> -                       clocks = <&clks IMX6UL_CLK_ENET2_REF>;
> -                       clock-names = "rmii-ref";
> -               };
> -       };
> -};
> -
> -
> -&lcdif {
> -       assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
> -       assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_lcdif_dat
> -                    &pinctrl_lcdif_ctrl>;
> -       status = "okay";
> -
> -       port {
> -               display_out: endpoint {
> -                       remote-endpoint = <&panel_in>;
> -               };
> -       };
> -};
> -
> -&pwm1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_pwm1>;
> -       status = "okay";
> -};
> -
> -&qspi {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_qspi>;
> -       status = "okay";
> -
> -       flash0: n25q256a@0 {
> -               #address-cells = <1>;
> -               #size-cells = <1>;
> -               compatible = "micron,n25q256a";
> -               spi-max-frequency = <29000000>;
> -               reg = <0>;
> -       };
> -};
> -
> -&sai2 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_sai2>;
> -       assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
> -                         <&clks IMX6UL_CLK_SAI2>;
> -       assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> -       assigned-clock-rates = <0>, <12288000>;
> -       fsl,sai-mclk-direction-output;
> -       status = "okay";
> -};
> -
> -&snvs_poweroff {
> -       status = "okay";
> -};
> -
> -&tsc {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_tsc>;
> -       xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
> -       measure-delay-time = <0xffff>;
> -       pre-charge-time = <0xfff>;
> -       status = "okay";
> -};
> -
> -&uart1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_uart1>;
> -       status = "okay";
> -};
> -
> -&uart2 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_uart2>;
> -       uart-has-rtscts;
> -       status = "okay";
> -};
> -
> -&usbotg1 {
> -       dr_mode = "otg";
> -       status = "okay";
> -};
> -
> -&usbotg2 {
> -       dr_mode = "host";
> -       disable-over-current;
> -       status = "okay";
> -};
> -
> -&usbphy1 {
> -       fsl,tx-d-cal = <106>;
> -};
> -
> -&usbphy2 {
> -       fsl,tx-d-cal = <106>;
> -};
> -
> -&usdhc1 {
> -       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> -       pinctrl-0 = <&pinctrl_usdhc1>;
> -       pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> -       pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> -       cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
> -       keep-power-in-suspend;
> -       wakeup-source;
> -       vmmc-supply = <&reg_sd1_vmmc>;
> -       status = "okay";
> -};
> -
> -&usdhc2 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_usdhc2>;
> -       no-1-8-v;
> -       keep-power-in-suspend;
> -       wakeup-source;
> -       status = "okay";
> -};
> -
> -&wdog1 {
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_wdog>;
> -       fsl,ext-reset-output;
> -};
> -
> -&iomuxc {
> -       pinctrl-names = "default";
> -
> -       pinctrl_csi1: csi1grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_CSI_MCLK__CSI_MCLK            0x1b088
> -                       MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK        0x1b088
> -                       MX6UL_PAD_CSI_VSYNC__CSI_VSYNC          0x1b088
> -                       MX6UL_PAD_CSI_HSYNC__CSI_HSYNC          0x1b088
> -                       MX6UL_PAD_CSI_DATA00__CSI_DATA02        0x1b088
> -                       MX6UL_PAD_CSI_DATA01__CSI_DATA03        0x1b088
> -                       MX6UL_PAD_CSI_DATA02__CSI_DATA04        0x1b088
> -                       MX6UL_PAD_CSI_DATA03__CSI_DATA05        0x1b088
> -                       MX6UL_PAD_CSI_DATA04__CSI_DATA06        0x1b088
> -                       MX6UL_PAD_CSI_DATA05__CSI_DATA07        0x1b088
> -                       MX6UL_PAD_CSI_DATA06__CSI_DATA08        0x1b088
> -                       MX6UL_PAD_CSI_DATA07__CSI_DATA09        0x1b088
> -               >;
> -       };
> -
> -       pinctrl_enet1: enet1grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
> -                       MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
> -                       MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
> -                       MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
> -                       MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
> -                       MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> -                       MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> -                       MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
> -               >;
> -       };
> -
> -       pinctrl_enet2: enet2grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
> -                       MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
> -                       MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
> -                       MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
> -                       MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
> -                       MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
> -                       MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
> -                       MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
> -                       MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
> -                       MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
> -               >;
> -       };
> -
> -       pinctrl_flexcan1: flexcan1grp{
> -               fsl,pins = <
> -                       MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX      0x1b020
> -                       MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX      0x1b020
> -               >;
> -       };
> -
> -       pinctrl_flexcan2: flexcan2grp{
> -               fsl,pins = <
> -                       MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX      0x1b020
> -                       MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX      0x1b020
> -               >;
> -       };
> -
> -       pinctrl_i2c1: i2c1grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
> -                       MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
> -               >;
> -       };
> -
> -       pinctrl_i2c2: i2c2grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> -                       MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> -               >;
> -       };
> -
> -       pinctrl_lcdif_dat: lcdifdatgrp {
> -               fsl,pins = <
> -                       MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
> -                       MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
> -                       MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
> -                       MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
> -                       MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
> -                       MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
> -                       MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
> -                       MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
> -                       MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
> -                       MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
> -                       MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
> -                       MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
> -                       MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
> -                       MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
> -                       MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
> -                       MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
> -                       MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
> -                       MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
> -                       MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
> -                       MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
> -                       MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
> -                       MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
> -                       MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
> -                       MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
> -               >;
> -       };
> -
> -       pinctrl_lcdif_ctrl: lcdifctrlgrp {
> -               fsl,pins = <
> -                       MX6UL_PAD_LCD_CLK__LCDIF_CLK        0x79
> -                       MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
> -                       MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
> -                       MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
> -                       /* used for lcd reset */
> -                       MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
> -               >;
> -       };
> -
> -       pinctrl_qspi: qspigrp {
> -               fsl,pins = <
> -                       MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
> -                       MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
> -                       MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
> -                       MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
> -                       MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
> -                       MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
> -               >;
> -       };
> -
> -       pinctrl_sai2: sai2grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK        0x17088
> -                       MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC        0x17088
> -                       MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA     0x11088
> -                       MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA        0x11088
> -                       MX6UL_PAD_JTAG_TMS__SAI2_MCLK           0x17088
> -                       MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04      0x17059
> -               >;
> -       };
> -
> -       pinctrl_pwm1: pwm1grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
> -               >;
> -       };
> -
> -       pinctrl_sim2: sim2grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD             0xb808
> -                       MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK            0x31
> -                       MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B          0xb808
> -                       MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN           0xb808
> -                       MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD           0xb809
> -                       MX6UL_PAD_CSI_DATA02__GPIO4_IO23                0x3008
> -               >;
> -       };
> -
> -       pinctrl_tsc: tscgrp {
> -               fsl,pins = <
> -                       MX6UL_PAD_GPIO1_IO01__GPIO1_IO01                0xb0
> -                       MX6UL_PAD_GPIO1_IO02__GPIO1_IO02                0xb0
> -                       MX6UL_PAD_GPIO1_IO03__GPIO1_IO03                0xb0
> -                       MX6UL_PAD_GPIO1_IO04__GPIO1_IO04                0xb0
> -               >;
> -       };
> -
> -       pinctrl_uart1: uart1grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> -                       MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> -               >;
> -       };
> -
> -       pinctrl_uart2: uart2grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x1b0b1
> -                       MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x1b0b1
> -                       MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS  0x1b0b1
> -                       MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS  0x1b0b1
> -               >;
> -       };
> -
> -       pinctrl_usdhc1: usdhc1grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
> -                       MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x10059
> -                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
> -                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
> -                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
> -                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
> -                       MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
> -                       MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
> -                       MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
> -               >;
> -       };
> -
> -       pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
> -               fsl,pins = <
> -                       MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
> -                       MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
> -                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
> -                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
> -                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
> -                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
> -
> -               >;
> -       };
> -
> -       pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
> -               fsl,pins = <
> -                       MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
> -                       MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
> -                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
> -                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
> -                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
> -                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
> -               >;
> -       };
> -
> -       pinctrl_usdhc2: usdhc2grp {
> -               fsl,pins = <
> -                       MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
> -                       MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
> -                       MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
> -                       MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
> -                       MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
> -                       MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
> -               >;
> -       };
> -
> -       pinctrl_wdog: wdoggrp {
> -               fsl,pins = <
> -                       MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
> -               >;
> -       };
>  };
> diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> index 4741871..30ef603 100644
> --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
> @@ -39,7 +39,10 @@
>   *     OTHER DEALINGS IN THE SOFTWARE.
>   */
>
> -#include "imx6ul-14x14-evk.dts"
> +/dts-v1/;
> +
> +#include "imx6ull.dtsi"
> +#include "imx6ul-14x14-evk.dtsi"
>
>  / {
>         model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux