This adds the binding for the i.MX8MQ Clock Controller Module. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- .../devicetree/bindings/clock/imx8mq-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt new file mode 100644 index 000000000000..c9b0123b80d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt @@ -0,0 +1,20 @@ +* Clock bindings for NXP i.MX8M Quad + +Required properties: +- compatible: Should be "nxp,imx8mq-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "ckil" + - "osc_25m" + - "osc_27m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h +for the full list of i.MX8M Quad clock IDs. -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html