[PATCH 4/6] dt-bindings: gpio: Add binding for Wii GPIO controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---
 .../bindings/gpio/nintendo,hollywood-gpio.txt      | 27 ++++++++++++++++++++++
 .../devicetree/bindings/powerpc/nintendo/wii.txt   |  9 +-------
 2 files changed, 28 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
new file mode 100644
index 000000000000..a97ce6b5b724
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -0,0 +1,27 @@
+Nintendo Wii (Hollywood) GPIO controller
+
+Required properties:
+- compatible: "nintendo,hollywood-gpio
+- reg: Physical base address and length of the controller's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+
+Optional properties:
+- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
+  interrupt.
+- interrupt-parent: phandle of the parent interrupt controller.
+
+Example:
+
+	GPIO: gpio@0d8000c0 {
+		#gpio-cells = <2>;
+		compatible = "nintendo,hollywood-gpio";
+		reg = <0x0d8000c0 0x40>;
+		gpio-controller;
+		ngpios = <24>;
+	}
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
index 36afa322b04b..a3dc4b9fa11a 100644
--- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -152,14 +152,7 @@ Nintendo Wii device tree
 
 1.l) The General Purpose I/O (GPIO) controller node
 
-  Represents the dual access 32 GPIO controller interface.
-
-  Required properties:
-
-  - #gpio-cells : <2>
-  - compatible : should be "nintendo,hollywood-gpio"
-  - reg : should contain the IPC registers location and length
-  - gpio-controller
+  see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
 
 1.m) The control node
 
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux