[PATCH v3 1/2] media: dt-bindings: Add OF properties to ov7670

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Describe newly introduced OF properties for ov7670 image sensor.
The driver supports two standard properties to configure synchronism
signals polarities and one custom property already supported as
platform data options by the driver to suppress pixel clock during
horizontal blanking.

Re-phrase child nodes description while at there.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/media/i2c/ov7670.txt | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
index 826b656..7c89ea5 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov7670.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
@@ -9,14 +9,23 @@ Required Properties:
 - clocks: reference to the xclk input clock.
 - clock-names: should be "xclk".
 
+Required Endpoint Properties:
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+  Default is active high.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+  Default is active high.
+
 Optional Properties:
 - reset-gpios: reference to the GPIO connected to the resetb pin, if any.
   Active is low.
 - powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
   Active is high.
+- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
+  signal during horizontal blankings.
 
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
 Documentation/devicetree/bindings/media/video-interfaces.txt.
 
 Example:
@@ -34,8 +43,13 @@ Example:
 			assigned-clocks = <&pck0>;
 			assigned-clock-rates = <25000000>;
 
+			ov7670,pclk-hb-disable;
+
 			port {
 				ov7670_0: endpoint {
+					hsync-active = <0>;
+					vsync-active = <0>;
+
 					remote-endpoint = <&isi_0>;
 				};
 			};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux