On Wed, Jan 10, 2018 at 8:50 PM, David Lechner <david@xxxxxxxxxxxxxx> wrote: > On 01/10/2018 04:24 PM, Adam Ford wrote: >> >> >> I am available tomorrow to build and test patches against the >> da850-evm. I just need to know which version(s) to test. > > > Great. As per the cover letter: > > You can find a working branch with everything included in the > "common-clk-v5" > branch of https://github.com/dlech/ev3dev-kernel.git. I wasn't sure if things had changed after some of the dialog about the bindings and device tree. Here is my log with DEBUG_LL and CONFIG_EARLY_PRINTK set : Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 4.15.0-rc4-g8564e0f (aford@ubuntu16) (gcc version 7.2.0 (Buildroot 2017.11.1-00021-g7b43660)) #2 PREEMPT Thu Jan 11 06:35:29 CST 2018 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f CPU: VIVT data cache, VIVT instruction cache OF: fdt: Machine model: DA850/AM1808/OMAP-L138 EVM Memory policy: Data cache writethrough cma: Reserved 16 MiB at 0xc2c00000 DaVinci da850/omap-l138 variant 0x0 random: fast init done Built 1 zonelists, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS2,115200n8 root=PARTUUID= rw rootfstype=ext4 rootwait Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 42164K/65536K available (4548K kernel code, 280K rwdata, 1044K rodata, 232K init, 143K bss, 6988K reserved, 16384K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (4550 kB) .init : 0x(ptrval) - 0x(ptrval) ( 232 kB) .data : 0x(ptrval) - 0x(ptrval) ( 281 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 144 kB) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. Tasks RCU enabled. NR_IRQS: 245 clocksource: timer0_1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Console: colour dummy device 80x30 Calibrating delay loop... 148.88 BogoMIPS (lpj=744448) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc0008400 - 0xc0008458 Hierarchical SRCU implementation. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu mux: initialized RTC_ALARM mux: Setting register RTC_ALARM mux: PINMUX0 (0x00000000) = 0x44080000 -> 0x24080000 edma 1c00000.edma: memcpy is disabled edma 1c00000.edma: TI EDMA DMA engine driver edma 1e30000.edma: memcpy is disabled edma 1e30000.edma: TI EDMA DMA engine driver i2c_davinci 1c22000.i2c: could not find pctldev for node /soc@1c00000/pinmux@14120/pinmux_i2c0_pins, deferring probe clocksource: Switched to clocksource timer0_1 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Initialise system trusted keyrings workingset: timestamp_bits=30 max_order=14 bucket_order=0 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered (default) io scheduler mq-deadline registered io scheduler kyber registered pinctrl-single 1c14120.pinmux: 160 pins at pa fdfe34a6 size 80 Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled 1c42000.serial: ttyS0 at MMIO 0x1c42000 (irq = 25, base_baud = 9375000) is a TI DA8xx/66AK2x 1d0c000.serial: ttyS1 at MMIO 0x1d0c000 (irq = 53, base_baud = 8250000) is a TI DA8xx/66AK2x 1d0d000.serial: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 8250000) is a TI DA8xx/66AK2x console [ttyS2] enabled brd: module loaded libphy: Fixed MDIO Bus: probed davinci_mdio 1e24000.mdio: failed to get device clock davinci_mdio: probe of 1e24000.mdio failed with error -2 i2c /dev entries driver davinci_mmc 1c40000.mmc: Using DMA, 4-bit mode NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Loading compiled-in X.509 certificates mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new high speed SDHC card at address b368 mmcblk0: mmc0:b368 00000 3.75 GiB mmcblk0: p1 p2 pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator pca953x 0-0020: failed reading register pca953x: probe of 0-0020 failed with error -121 console [netcon0] enabled netconsole: network logging started davinci_emac 1e20000.ethernet: incompatible machine/device type for reading mac address hctosys: unable to open rtc device (rtc0) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
