From: Patrice Chotard <patrice.chotard@xxxxxx>
The GPIO polarity is missing in the hdmi,hpd-gpio property, this
fixes the following DT warnings:
arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxx>
---
arch/arm/boot/dts/stih407.dtsi | 3 ++-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index fa14983..11fdecd 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -8,6 +8,7 @@
*/
#include "stih407-clock.dtsi"
#include "stih407-family.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
soc {
sti-display-subsystem {
@@ -122,7 +123,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 07b02a3..e4b7e3d 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -9,6 +9,7 @@
#include "stih410-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
bdisp0 = &bdisp0;
@@ -213,7 +214,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
