This series adds RZ/A1 gadget support to the renesas_usbhs driver. Basically, it's almost the same HW as the R-Car (and SH) parts. The only real difference is the some extra registers for the PHY. This was tested on an RSK board by connecting to a PC as an Ethernet CDC gadget. v2: * Node name is now generic 'usb@' * GIC_SPI (73-32) is now just GIC_SPI 41 * All hex number are lower case * Added Reviewed-by Chris Brandt (3): usb: renesas_usbhs: Add support for RZ/A1 dt-bindings: usb: renesas_usbhs: Add support for RZ/A1 ARM: dts: r7s72100: add USB device to device tree .../devicetree/bindings/usb/renesas_usbhs.txt | 2 + arch/arm/boot/dts/r7s72100.dtsi | 20 +++++++++ drivers/usb/renesas_usbhs/Makefile | 2 +- drivers/usb/renesas_usbhs/common.c | 17 +++++++ drivers/usb/renesas_usbhs/common.h | 6 +++ drivers/usb/renesas_usbhs/rza.c | 52 ++++++++++++++++++++++ drivers/usb/renesas_usbhs/rza.h | 4 ++ include/linux/usb/renesas_usbhs.h | 1 + 8 files changed, 103 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/renesas_usbhs/rza.c create mode 100644 drivers/usb/renesas_usbhs/rza.h -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
