On Tue, Jan 02, 2018 at 01:44:51PM +0100, Pavel Machek wrote: > From: Filip Matijević <filip.matijevic.pz@xxxxxxxxx> > > This prepares binding for light sensor used in Nokia N9. "dt-bindings: ..." is the preferred subject prefix. > > Signed-off-by: Filip Matijević <filip.matijevic.pz@xxxxxxxxx> > Signed-off-by: Pavel Machek <pavel@xxxxxx> > > diff --git a/Documentation/devicetree/bindings/misc/avago-apds990x.txt b/Documentation/devicetree/bindings/misc/avago-apds990x.txt > new file mode 100644 > index 0000000..480c0b1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/misc/avago-apds990x.txt Put this with other light sensors whether you use IIO or not: bindings/iio/light/ > @@ -0,0 +1,41 @@ > +Avago APDS990X driver Bindings aren't drivers. > + > +https://docs.broadcom.com/docs/AV02-2867EN > + > +Required properties: > +- compatible: "avago,apds990x" > +- reg: address on the I2C bus > +- interrupts: external interrupt line number > +- vdd-supply: power supply for VDD > +- vled-supply: power supply for LEDA > +- avago,ga: Glass attenuation We already have "upisemi,glass-coef". Can we align on something common. > +- avago,cf1: Clear channel factor 1 > +- avago,irf1: IR channel factor 1 > +- avago,cf2: Clear channel factor 2 > +- avago,irf2: IR channel factor 2 Perhaps 2 properties with 2 cells for factor 1 and 2. > +- avago,df: Device factor Units/range for all these? > +- avago,pdrive: IR current, one of APDS_IRLED_CURR_XXXmA values Don't we have standard current property for LEDs? > +- avago,ppcount: Proximity pulse count Is this standard for prox sensors? > + > +Example (Nokia N9): > + > + als_ps@39 { light-sensor@39 > + compatible = "avago,apds990x"; > + reg = <0x39>; > + > + interrupt-parent = <&gpio3>; > + interrupts = <19 (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)>; /* gpio_83 */ > + > + vdd-supply = <&vaux1>; > + vled-supply = <&vbat>; > + > + avago,ga = <168834>; > + avago,cf1 = <4096>; > + avago,irf1 = <7824>; > + avago,cf2 = <877>; > + avago,irf2 = <1575>; > + avago,df = <52>; > + > + avago,pdrive = <0x2>; /* APDS_IRLED_CURR_25mA */ > + avago,ppcount = <5>; > + }; > > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
