Hello everyone,
this is the third round for Renesas CEU unit.
Patch now based on v4.15-rc6, a base tag for testing is available at:
git://jmondi.org/linux tag:v4.15-rc6-ceu-v3-base for the interested ones.
Just closed review comments received from Laurent, Geert and Fabio on v2,
not a huge changelog in this iteration, compared to v1->v2 one.
Hopefully we're close to final version, I just would like to hear about
runtime_pm management, as I have noticed in Sakari's review of other patches
I may have been using runtime_pm a bit naively in this driver. Just want a
confirmation this is ok.
Tested on RZ with GR-Peach and ov7670 and SH4 with Migo-R platform with ov7725.
Thanks
j
v2->v3:
- Improved DT bindings removing standard properties (pinctrl- ones and
remote-endpoint) not specific to this driver and improved description of
compatible strings
- Remove ov772x's xlkc_rate property and set clock rate in Migo-R board file
- Made 'xclk' clock private to ov772x driver in Migo-R board file
- Change 'rstb' GPIO active output level and changed ov772x and tw9910 drivers
accordingly as suggested by Fabio
- Minor changes in CEU driver to address Laurent's comments
- Moved Migo-R setup patch to the end of the series to silence 0-day bot
- Renamed tw9910 clock to 'xti' as per video decoder manual
- Changed all SPDX identifiers to GPL-2.0 from previous GPL-2.0+
v1->v2:
- DT
-- Addressed Geert's comments and added clocks for CEU to mstp6 clock source
-- Specified supported generic video iterfaces properties in dt-bindings and
simplified example
- CEU driver
-- Re-worked interrupt handler, interrupt management, reset(*) and capture
start operation
-- Re-worked querycap/enum_input/enum_frameintervals to fix some
v4l2_compliance failures
-- Removed soc_camera legacy operations g/s_mbus_format
-- Update to new notifier implementation
-- Fixed several comments from Hans, Laurent and Sakari
- Migo-R
-- Register clocks and gpios for sensor drivers in Migo-R setup
-- Updated sensors (tw9910 and ov772x) drivers headers and drivers to close
remarks from Hans and Laurent:
--- Removed platform callbacks and handle clocks and gpios from sensor drivers
--- Remove g/s_mbus_config operations
Jacopo Mondi (9):
dt-bindings: media: Add Renesas CEU bindings
include: media: Add Renesas CEU driver interface
v4l: platform: Add Renesas CEU driver
ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
v4l: i2c: Copy ov772x soc_camera sensor driver
media: i2c: ov772x: Remove soc_camera dependencies
v4l: i2c: Copy tw9910 soc_camera sensor driver
media: i2c: tw9910: Remove soc_camera dependencies
arch: sh: migor: Use new renesas-ceu camera driver
.../devicetree/bindings/media/renesas,ceu.txt | 85 +
arch/arm/boot/dts/r7s72100.dtsi | 15 +-
arch/sh/boards/mach-migor/setup.c | 225 ++-
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 +-
drivers/media/i2c/Kconfig | 20 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/ov772x.c | 1181 ++++++++++++++
drivers/media/i2c/tw9910.c | 1039 ++++++++++++
drivers/media/platform/Kconfig | 9 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/renesas-ceu.c | 1649 ++++++++++++++++++++
include/media/drv-intf/renesas-ceu.h | 26 +
include/media/i2c/ov772x.h | 6 +-
include/media/i2c/tw9910.h | 9 +
14 files changed, 4138 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/renesas,ceu.txt
create mode 100644 drivers/media/i2c/ov772x.c
create mode 100644 drivers/media/i2c/tw9910.c
create mode 100644 drivers/media/platform/renesas-ceu.c
create mode 100644 include/media/drv-intf/renesas-ceu.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
