Hi, This series adds support for for using CPUFreq as a cooling device for the A57 CUP:s on Renesas H3 and M3-W SoC:s. It depends on Simon Horman's topic/rcar-gen3-cpufreq-v4 branch [1] and is tested on H3 and M3-W. For test results and test procedure please see: http://elinux.org/R-Car/Tests:rcar_gen3_thermal Few notes on the specific values used in this series and why they might need to be changed. - The trip point temperature of 95000 used is the most conservative one from the BSP and maybe should be set at 110000 which is the most aggressive one in the BSP. - The cooling states described in all cooling-maps nodes might be subject to change depending on the out-come of the ongoing review process of Simon's work. It should use the highest possible cooling state so if the number of states change due review of his work this should be reflected in this series. 1. https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git * Changes since v1 - Added acks from Eduardo Valentin. - Rebased on top of the latest branch of Simons work. Niklas Söderlund (2): arm64: dts: r8a7795: add thermal cooling management arm64: dts: r8a7796: add thermal cooling management arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a7796.dtsi | 38 ++++++++++++++++++++++++++++++ 2 files changed, 78 insertions(+) -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
