Hi, This adds support for the internal switch found in GE Healthcare B450v3, B650v3 and B850v3. All devices use a GPIO bitbanged MDIO bus to communicate with the switch and a PCIe based network card for exchanging network data. The cpu network data link requires, that the switch's internal phy interface is enabled, so support for that is added by the first patch in this series. The patch series is based on v4.15-rc6. -- Sebastian Sebastian Reichel (6): net: dsa: Support internal phy on 'cpu' port net: dsa: mv88e6xxx: add 88E6240 DT compatible ARM: dts: imx6q-bx50v3: Add internal switch ARM: dts: imx6q-b850v3: Add switch port configuration ARM: dts: imx6q-b650v3: Add switch port configuration ARM: dts: imx6q-b450v3: Add switch port configuration .../devicetree/bindings/net/dsa/marvell.txt | 6 +- arch/arm/boot/dts/imx6q-b450v3.dts | 47 +++++++++++++++ arch/arm/boot/dts/imx6q-b650v3.dts | 47 +++++++++++++++ arch/arm/boot/dts/imx6q-b850v3.dts | 70 ++++++++++++++++++++++ arch/arm/boot/dts/imx6q-bx50v3.dtsi | 37 ++++++++++++ drivers/net/dsa/mv88e6xxx/chip.c | 4 ++ net/dsa/port.c | 26 ++++++-- 7 files changed, 231 insertions(+), 6 deletions(-) -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
