This adds support for enabling the internal phy for a 'cpu' port.
It has been tested on GE B850v3 and B650v3, which have a built-in
MV88E6240 switch connected to a PCIe based network card. Without
this patch the link does not come up and no traffic can be routed
through the switch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
---
net/dsa/port.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/net/dsa/port.c b/net/dsa/port.c
index bb4be2679904..f99c1d34416c 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -282,6 +282,10 @@ int dsa_port_fixed_link_register_of(struct dsa_port *dp)
int mode;
int err;
+ mode = of_get_phy_mode(dn);
+ if (mode < 0)
+ mode = PHY_INTERFACE_MODE_NA;
+
if (of_phy_is_fixed_link(dn)) {
err = of_phy_register_fixed_link(dn);
if (err) {
@@ -292,10 +296,6 @@ int dsa_port_fixed_link_register_of(struct dsa_port *dp)
}
phydev = of_phy_find_device(dn);
-
- mode = of_get_phy_mode(dn);
- if (mode < 0)
- mode = PHY_INTERFACE_MODE_NA;
phydev->interface = mode;
genphy_config_init(phydev);
@@ -305,6 +305,24 @@ int dsa_port_fixed_link_register_of(struct dsa_port *dp)
ds->ops->adjust_link(ds, port, phydev);
put_device(&phydev->mdio.dev);
+ } else if (mode == PHY_INTERFACE_MODE_INTERNAL ||
+ mode == PHY_INTERFACE_MODE_NA) {
+ phydev = mdiobus_get_phy(ds->slave_mii_bus, port);
+ if (phydev) {
+ genphy_config_init(phydev);
+ genphy_resume(phydev);
+ genphy_read_status(phydev);
+
+ if (ds->ops->adjust_link)
+ ds->ops->adjust_link(ds, port, phydev);
+
+ dev_dbg(ds->dev, "enabled cpu port's phy: %s",
+ phydev_name(phydev));
+ } else {
+ dev_warn(ds->dev, "cpu port has no internal phy and no fixed linked has been configured!");
+ }
+ } else {
+ dev_err(ds->dev, "unsupported phy mode!");
}
return 0;
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
