Hi,
This series takes over Baruch's series by integrating his patches about
supporting thermal on Armada 7K and 8K SoCs within a larger series with
several improvements on the armada_thermal.c driver.
For now, Armada 380 and CP110 compatibles share the same initialization
routine but this will probably change in the near future when adding
support for overheat interrupts.
DT bindings documentation is updated to match existing code.
Armada AP806 and CP110 DT are also updated with thermal nodes and have
already been accepted (thus absent in this series).
Thank you,
Miquèl
Changes since v6:
- Added Gregory's Tested-by tags.
- Added Rob's Reviewed-by tag on the bindings.
- Addressed Baruch's comment on the temperature derivation.
Baruch Siach (4):
dt-bindings: thermal: Describe Armada AP806 and CP110
thermal: armada: Use msleep for long delays
thermal: armada: Add support for Armada AP806
thermal: armada: Add support for Armada CP110
Miquel Raynal (7):
thermal: armada: Simplify the check of the validity bit
thermal: armada: Clarify control registers accesses
thermal: armada: Use real status register name
thermal: armada: Update Kconfig and module description
thermal: armada: Change sensors trim default value
thermal: armada: Wait sensors validity before exiting the init
callback
thermal: armada: Give meaningful names to the thermal zones
.../devicetree/bindings/thermal/armada-thermal.txt | 37 ++-
drivers/thermal/Kconfig | 4 +-
drivers/thermal/armada_thermal.c | 253 +++++++++++++++------
3 files changed, 214 insertions(+), 80 deletions(-)
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
