From: Christian Hemp <c.hemp@xxxxxxxxx> Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit with i.MX 6DualLight/Solo with NAND. Following interfaces are supported: - 100 MBit Ethernet - USB Host - RS232 - HDMI Signed-off-by: Christian Hemp <c.hemp@xxxxxxxxx> Signed-off-by: Stefan Christ <s.christ@xxxxxxxxx> Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 64 +++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b793617..07d99a1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -388,6 +388,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000..f56c20f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@xxxxxxxxx> + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND"; + compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6dl"; + + chosen { + linux,stdout-path = &uart2; + }; +}; + +ðphy { + max-speed = <100>; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html