On Tue, Dec 12, 2017 at 06:25:11PM +0000, Biju Das wrote: > This patch enables SGTL5000 audio codec on the carrier board. > > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx> > Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> Somehow I missed applying this one. I have now done so with the minor update noted below. > --- > arch/arm/boot/dts/iwg20d-q7-common.dtsi | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > index 54470c6..2070b14 100644 > --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi > +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > @@ -20,6 +20,20 @@ > stdout-path = "serial0:115200n8"; > }; > > + audio_clock: audio_clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <26000000>; > + }; > + > + reg_1p5v: 1p5v { > + compatible = "regulator-fixed"; > + regulator-name = "1P5V"; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + }; > + > vcc_sdhi1: regulator-vcc-sdhi1 { > compatible = "regulator-fixed"; > > @@ -83,6 +97,16 @@ > compatible = "ti,bq32000"; > reg = <0x68>; > }; > + > + sgtl5000: codec@0a { s/@0a/@a/ Base addresses should not have a leading 0. # make dtbs W=1 DTC arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (unit_address_format): Node /soc/i2c@e6530000/codec@0a unit name should not have leading 0s > + compatible = "fsl,sgtl5000"; > + #sound-dai-cells = <0>; > + reg = <0x0a>; > + clocks = <&audio_clock>; > + VDDA-supply = <®_3p3v>; > + VDDIO-supply = <®_3p3v>; > + VDDD-supply = <®_1p5v>; > + }; > }; > > &pci0 { > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html