Hello Robert, On Mon, 18 Dec 2017 08:11:35 +0100 Robert Jarzmik <robert.jarzmik@xxxxxxx> wrote: > Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> writes: > > >> Robert, it would be great if you could also do more testing on PXA > >> and validate this driver. If needed, a branch ready to be tested is > >> available at [3]. It is based on nand/next and has all the changes > >> brought by the previously mentionned series as well as this one. > > > > Robert, do you think you'll have some time to test Miquel's branch > > on your PXA boards? Miquel already tested on one of these boards > > (CM-X300), but we'd like to have other testers. Also feel free to > > review the driver if have the time. > > > > Thanks, > > > > Boris > > Hi Boris and Miquel, > > I have applied the whole serie to linux-next yesterday. > > A boot attempt on my zylonite with my old defconfig (with the new > Marvell NAND config activated) yields to : > - this message > [ 3.136818] marvell-nfc pxa3xx-nand: could not identify the nand > chip [ 3.143874] marvell-nfc: probe of pxa3xx-nand failed with > error -22 > - then my board hangs > > Is there something to be done to improve the trace level so that you > can guess what's happening ? Thank you very much for testing this. Could you please try this branch [1] instead of linux-next + the patches? Also, can you please add #define DEBUG in marvell_nand.c + nand_base.c, it should help us figuring out what is wrong. Thank you, Miquèl [1] https://github.com/miquelraynal/linux/tree/marvell/nand-next/nfc -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
