On Sun, Dec 17, 2017 at 11:45:46PM +0100, Philipp Rossak wrote:
> The ir interface is like on the H3 located at 0x01f02000 and is exactly
> the same. This patch adds support for the ir interface on the A83T.
>
> Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 954c2393325f..9e7ed3b9a6b8 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -503,6 +503,16 @@
> #reset-cells = <1>;
> };
>
> + ir: ir@01f02000 {
> + compatible = "allwinner,sun5i-a13-ir";
> + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
> + clock-names = "apb", "ir";
> + resets = <&r_ccu RST_APB0_IR>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x01f02000 0x40>;
The size should be the size of the whole memory block, not just the
registers you need.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
