RE: [PATCH v2 6/6] phy: renesas: rcar-gen3-usb2: add gpio handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Rob,

Thank you for your comments!

> -----Original Message-----
> From: Rob Herring, Sent: Sunday, December 17, 2017 3:05 AM
> 
> On Fri, Dec 15, 2017 at 02:45:26PM +0900, Yoshihiro Shimoda wrote:
> > Some R-Car SoCs (e.g. R-Car D3) doesn't have dedicated pins of VBUS
> > and ID. So, they may be connected to gpio pins. To handle the gpio
> > pins, this patch adds the handling of VBUS and ID pins instead of
> > dedicated pins.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |  2 +
> >  drivers/phy/renesas/phy-rcar-gen3-usb2.c           | 77 ++++++++++++++++++++--
> >  2 files changed, 72 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > index 99b651b..999a6ef 100644
> > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> > @@ -27,6 +27,8 @@ channel as USB OTG:
> >  - interrupts: interrupt specifier for the PHY.
> >  - vbus-supply: Phandle to a regulator that provides power to the VBUS. This
> >  	       regulator will be managed during the PHY power on/off sequence.
> > +- vbus-gpios: use gpio to control vbus instead of dedicated pin.
> 
> How does this relate to vbus-supply? A gpio-regulator doesn't work here?

Thank you for the pointed out. You're correct. A gpio-regulator can work intead of "vbus-gpios".
So, I will drop this.

> > +- id-gpios: use gpio to detect id instead of dedicated pin.
> 
> These aren't part of the phy, but really belong in a connector node.

I'm afraid but I don't understand "a connector node" mean.
Is it an extcon device for instance?
If so, I'll try to use extcon-usb-gpio.c instead of own gpio handling on the driver.

Best regards,
Yoshihiro Shimoda

> Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux