On Fri, Dec 15, 2017 at 02:45:26PM +0900, Yoshihiro Shimoda wrote: > Some R-Car SoCs (e.g. R-Car D3) doesn't have dedicated pins of VBUS > and ID. So, they may be connected to gpio pins. To handle the gpio > pins, this patch adds the handling of VBUS and ID pins instead of > dedicated pins. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > --- > .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 + > drivers/phy/renesas/phy-rcar-gen3-usb2.c | 77 ++++++++++++++++++++-- > 2 files changed, 72 insertions(+), 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > index 99b651b..999a6ef 100644 > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > @@ -27,6 +27,8 @@ channel as USB OTG: > - interrupts: interrupt specifier for the PHY. > - vbus-supply: Phandle to a regulator that provides power to the VBUS. This > regulator will be managed during the PHY power on/off sequence. > +- vbus-gpios: use gpio to control vbus instead of dedicated pin. How does this relate to vbus-supply? A gpio-regulator doesn't work here? > +- id-gpios: use gpio to detect id instead of dedicated pin. These aren't part of the phy, but really belong in a connector node. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
