On Fri, Dec 15, 2017 at 05:51:59PM +0100, Aleksandar Markovic wrote: > From: Paul Burton <paul.burton@xxxxxxxx> > > Document a binding for the MIPS Cluster Power Controller (CPC) which > simply allows the device tree to specify where the CPC registers should > be mapped. > > Signed-off-by: Paul Burton <paul.burton@xxxxxxxx> > Signed-off-by: Aleksandar Markovic <aleksandar.markovic@xxxxxxxx> > --- > Documentation/devicetree/bindings/misc/mti,mips-cpc.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt > > diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt > new file mode 100644 > index 0000000..92eb08f > --- /dev/null > +++ b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt > @@ -0,0 +1,8 @@ > +Binding for MIPS Cluster Power Controller (CPC). > + > +This binding allows a system to specify where the CPC registers should be > +mapped using device tree. Not really where you map registers, but where they are located. > + > +Required properties: > +compatible : Should be "mti,mips-cpc". Only one version of the block? > +regs: Should describe the address & size of the CPC register region. > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
