Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Suggested-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
---
arch/arm/boot/dts/zx296702.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
index 8a74efdb6360..240e7a23d81f 100644
--- a/arch/arm/boot/dts/zx296702.dtsi
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -56,7 +56,7 @@
clocks = <&topclk ZX296702_A9_PERIPHCLK>;
};
- l2cc: l2-cache-controller@0x00c00000 {
+ l2cc: l2-cache-controller@c00000 {
compatible = "arm,pl310-cache";
reg = <0x00c00000 0x1000>;
cache-unified;
@@ -67,30 +67,30 @@
arm,double-linefill-incr = <0>;
};
- pcu: pcu@0xa0008000 {
+ pcu: pcu@a0008000 {
compatible = "zte,zx296702-pcu";
reg = <0xa0008000 0x1000>;
};
- topclk: topclk@0x09800000 {
+ topclk: topclk@9800000 {
compatible = "zte,zx296702-topcrm-clk";
reg = <0x09800000 0x1000>;
#clock-cells = <1>;
};
- lsp1clk: lsp1clk@0x09400000 {
+ lsp1clk: lsp1clk@9400000 {
compatible = "zte,zx296702-lsp1crpm-clk";
reg = <0x09400000 0x1000>;
#clock-cells = <1>;
};
- lsp0clk: lsp0clk@0x0b000000 {
+ lsp0clk: lsp0clk@b000000 {
compatible = "zte,zx296702-lsp0crpm-clk";
reg = <0x0b000000 0x1000>;
#clock-cells = <1>;
};
- uart0: serial@0x09405000 {
+ uart0: serial@9405000 {
compatible = "zte,zx296702-uart";
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@
status = "disabled";
};
- uart1: serial@0x09406000 {
+ uart1: serial@9406000 {
compatible = "zte,zx296702-uart";
reg = <0x09406000 0x1000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
status = "disabled";
};
- mmc0: mmc@0x09408000 {
+ mmc0: mmc@9408000 {
compatible = "snps,dw-mshc";
#address-cells = <1>;
#size-cells = <0>;
@@ -119,7 +119,7 @@
status = "disabled";
};
- mmc1: mmc@0x0b003000 {
+ mmc1: mmc@b003000 {
compatible = "snps,dw-mshc";
#address-cells = <1>;
#size-cells = <0>;
@@ -132,7 +132,7 @@
status = "disabled";
};
- sysctrl: sysctrl@0xa0007000 {
+ sysctrl: sysctrl@a0007000 {
compatible = "zte,sysctrl", "syscon";
reg = <0xa0007000 0x1000>;
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
