Hi,
On Tue, Dec 12, 2017 at 10:45:21PM +0530, jassisinghbrar@xxxxxxxxx wrote:
> From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
>
> This patch adds documentation for Device-Tree bindings for the
> Socionext NetSec Controller driver.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
> Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> ---
> .../devicetree/bindings/net/socionext-netsec.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/socionext-netsec.txt
>
> diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt
> new file mode 100644
> index 0000000..4695969
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt
> @@ -0,0 +1,45 @@
> +* Socionext NetSec Ethernet Controller IP
> +
> +Required properties:
> +- compatible: Should be "socionext,synquacer-netsec"
> +- reg: Address and length of the control register area, followed by the
> + address and length of the EEPROM holding the MAC address and
> + microengine firmware
> +- interrupts: Should contain ethernet controller interrupt
> +- clocks: phandle to the PHY reference clock, and any other clocks to be
> + switched by runtime_pm
> +- clock-names: Required only if more than a single clock is listed in 'clocks'.
> + The PHY reference clock must be named 'phy_refclk'
Please define the full set of clocks (and their names) explicitly. This
should be well-known.
Otherwise, this looks ok.
Thanks,
Mark.
> +- phy-mode: See ethernet.txt file in the same directory
> +- phy-handle: phandle to select child phy
> +
> +Optional properties: (See ethernet.txt file in the same directory)
> +- dma-coherent: Boolean property, must only be present if memory
> + accesses performed by the device are cache coherent
> +- local-mac-address
> +- mac-address
> +- max-speed
> +- max-frame-size
> +
> +Required properties for the child phy:
> +- reg: phy address
> +
> +Example:
> + eth0: netsec@522D0000 {
> + compatible = "socionext,synquacer-netsec";
> + reg = <0 0x522D0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>;
> + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk_netsec>;
> + phy-mode = "rgmii";
> + max-speed = <1000>;
> + max-frame-size = <9000>;
> + phy-handle = <ðphy0>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
> + };
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
