Re: [PATCH v2] ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Guillaume,

On 2017-12-12 11:43, Guillaume Tucker wrote:
On 12/12/17 10:17, Marek Szyprowski wrote:
Hi Krzysztof,

On 2017-12-12 11:09, Krzysztof Kozlowski wrote:
On Tue, Dec 12, 2017 at 10:55 AM, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
On Tue, Dec 12, 2017 at 8:42 AM, Javier Martinez Canillas
<javierm@xxxxxxxxxx> wrote:
Commit 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes") disabled the Mixer node by default in the DTSI and enabled for each Exynos 542x DTS. But unfortunately it missed to enable it for the Exynos5800 Peach Pi machine, since the 5800 is also an 542x SoC variant.

Fixes: 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes")
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Acked-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>

---

Changes in v2:
- Remove RFT tag.
Thanks guys! However I still would like to see a tested-by for this on
Peach Pi (AFAIU, Marek's only acked the code/solution).
On the other hand I could just apply it for my for-next branch and
we'll see if it fixes kernel-ci boot tests... Not a nice way of
testing but apparently no one has Peach Pi.

Frankly, I don't expect that this will solve the boot hang issue on PeachPi.
However it should at least hide the unbalanced regulator issue.

We have a peach-pi in our LAVA lab so I've tested it and
actually, it does fix the hang on v4.15-rc3:

  https://lava.collabora.co.uk/scheduler/job/1019877
  https://lava.collabora.co.uk/scheduler/job/1019878

I ran it twice and it booted both times.  I also ran the same
boot tests with the same kernel but the dtb from v4.15-rc3
without the fix to double check and these failed:

  https://lava.collabora.co.uk/scheduler/job/1019879
  https://lava.collabora.co.uk/scheduler/job/1019880


Tested-by: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>


Thanks for the fix!

Well, thanks for the test! It proves that there the boot failure is
caused by an issue somewhere in the error path of Exynos DRM, Analogix
DP, Simple Panel or other drivers.

This patch simply hides it by fixing the source issue of the Exynos
DRM initialization failure. :-)

I hope Javier will be able to investigate the discussed hang issue
later, as fixing it is also imho important.

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux