Re: [PATCH v8 4/6] clocksource: stm32: only use 32 bits timers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2017-12-07 17:49 GMT+01:00 Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>:
> On 07/12/2017 17:33, Benjamin Gaignard wrote:
>> 2017-12-07 16:27 GMT+01:00 Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>:
>>> On 14/11/2017 09:52, Benjamin Gaignard wrote:
>>>> The clock driving counters is at 90MHz so the maximum period
>>>> for 16 bis counters is around 750 ms which is a short period
>>>> for a clocksource.
>>>
>>> Isn't it 728us ?
>>
>> yes it is: 2^16 / 90.000.000 => 728us
>
> Ok, now I can do the connection with the previous patch.
>
> So, the real issue of all this is the 16bits clocksource is wrapping up
> every 728us, hence the clockevent periodically expires every ~728us to
> keep the timekeeping consistent. Unfortunately, the kernel has a too
> high overhead for this as the system is consistently processing this
> timer leading to a CPU time resource starvation.
>
> Is that correct ?

Yes that is correct

>
>
>>>> For 32 bits counters this period is close
>>>> 47 secondes which is more acceptable.
>>>>
>>>> This patch remove 16 bits counters support and makes sure that
>>>> they won't be probed anymore.
>>>>
>>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
>>>> ---
>>>>  drivers/clocksource/timer-stm32.c | 26 ++++++++++++--------------
>>>>  1 file changed, 12 insertions(+), 14 deletions(-)
>>>>
>>>> diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
>>>> index ae41a19..8173bcf 100644
>>>> --- a/drivers/clocksource/timer-stm32.c
>>>> +++ b/drivers/clocksource/timer-stm32.c
>>>> @@ -83,9 +83,9 @@ static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
>>>>  static int __init stm32_clockevent_init(struct device_node *node)
>>>>  {
>>>>       struct reset_control *rstc;
>>>> -     unsigned long max_delta;
>>>> -     int ret, bits, prescaler = 1;
>>>> +     unsigned long max_arr;
>>>>       struct timer_of *to;
>>>> +     int ret;
>>>>
>>>>       to = kzalloc(sizeof(*to), GFP_KERNEL);
>>>>       if (!to)
>>>> @@ -115,29 +115,27 @@ static int __init stm32_clockevent_init(struct device_node *node)
>>>>
>>>>       /* Detect whether the timer is 16 or 32 bits */
>>>>       writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
>>>> -     max_delta = readl_relaxed(timer_of_base(to) + TIM_ARR);
>>>> -     if (max_delta == ~0U) {
>>>> -             prescaler = 1;
>>>> -             bits = 32;
>>>> -     } else {
>>>> -             prescaler = 1024;
>>>> -             bits = 16;
>>>> +     max_arr = readl_relaxed(timer_of_base(to) + TIM_ARR);
>>>> +     if (max_arr != ~0U) {
>>>> +             pr_err("32 bits timer is needed\n");
>>>> +             ret = -EINVAL;
>>>> +             goto deinit;
>>>>       }
>>>> +
>>>>       writel_relaxed(0, timer_of_base(to) + TIM_ARR);
>>>>
>>>> -     writel_relaxed(prescaler - 1, timer_of_base(to) + TIM_PSC);
>>>> +     writel_relaxed(0, timer_of_base(to) + TIM_PSC);
>>>>       writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
>>>>       writel_relaxed(TIM_DIER_UIE, timer_of_base(to) + TIM_DIER);
>>>>       writel_relaxed(0, timer_of_base(to) + TIM_SR);
>>>>
>>>>       clockevents_config_and_register(&to->clkevt,
>>>> -                                     timer_of_period(to), MIN_DELTA, max_delta);
>>>> -
>>>> -     pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
>>>> -                     node, bits);
>>>> +                                     timer_of_period(to), MIN_DELTA, ~0U);
>>>>
>>>>       return 0;
>>>>
>>>> +deinit:
>>>> +     timer_of_exit(to);
>>>>  err:
>>>>       kfree(to);
>>>>       return ret;
>>>>
>>>
>>>
>>> --
>>>  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>>>
>>> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
>>> <http://twitter.com/#!/linaroorg> Twitter |
>>> <http://www.linaro.org/linaro-blog/> Blog
>>>
>>
>>
>>
>
>
> --
>  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>



-- 
Benjamin Gaignard

Graphic Study Group

Linaro.org │ Open source software for ARM SoCs

Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux