Hold your horses. :)
> > > Add a driver for the BCM59056 PMU multi-function device. The driver
> > > initially supports regmap initialization and instantiation of the
> > > voltage regulator device function of the PMU.
> > >
> > > Signed-off-by: Matt Porter <mporter@xxxxxxxxxx>
> > > Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
> > > Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
> > > ---
> > > drivers/mfd/Kconfig | 8 +++
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/bcm59056.c | 119 +++++++++++++++++++++++++++++++++++++++++++
> > > include/linux/mfd/bcm59056.h | 35 +++++++++++++
> > > 4 files changed, 163 insertions(+)
> > > create mode 100644 drivers/mfd/bcm59056.c
> > > create mode 100644 include/linux/mfd/bcm59056.h
<snip>
> > I thought this was a DT only driver? If so, you probably want to use
> > of_match_device() instead.
>
> Correct, I'll use of_match_device()
If you're going to use this ...
<snip>
> > You've gone to the trouble of setting a device version here, but you
> > don't seem to use it?
>
> I'll drop the device version
... then you'll still need this.
> > > +static const struct i2c_device_id bcm59056_i2c_id[] = {
> > > + { "bcm59056", BCM59056 },
> > > + { }
> > > +};
> >
> > Ah, I guess this is where id->driver comes from.
> >
> > It's pretty silly that the I2C subsystem demands the presence of this
> > table, despite not using it if an of_device_id table is present.
>
> It does make it very difficult to follow DT enabled I2C client drivers
> :( I'll drop the BCM59056 too.
And I don't think you can drop this, as the I2C subsystem still
insists on it.
> > > +/* chip id */
> > > +#define BCM59056 0
> >
> > Lonely, oh so lonely!
>
> Understood. Will remove.
I think you need to keep this to supply the silly I2C ID table.
I would just omit the '.data = (void *) VERSION' from the
of_match_table until you require it.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
