On 12/01/2017 05:06 PM, Pavel Machek wrote:
> Hi!
>
>> This adds basic support for BQ27521 battery monitor, used in Nokia N9
>> and N950. In particular, battery voltage is important to be able to
>> tell when the battery is almost empty. Emptying battery on N950 is
>> pretty painful, as flasher needs to be used to recover phone in such
>> case.
>
> Sebastian, ping? This one should not be too controversial.
>
> If you could also apply the "shut down when battery is low", that
> would be nice.
>
> Thanks,
> Pavel
>
>> Signed-off-by: Pavel Machek <pavel@xxxxxx>
>>
>> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
>> index 51f0961..f684288 100644
>> --- a/drivers/power/supply/bq27xxx_battery.c
>> +++ b/drivers/power/supply/bq27xxx_battery.c
>> @@ -323,6 +323,30 @@ static u8
>> [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>> BQ27XXX_DM_REG_ROWS,
>> },
>> + bq27521_regs[BQ27XXX_REG_MAX] = {
>> + [BQ27XXX_REG_CTRL] = 0x02,
>> + [BQ27XXX_REG_TEMP] = 0x0a,
>> + [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_VOLT] = 0x0c,
>> + [BQ27XXX_REG_AI] = 0x0e,
>> + [BQ27XXX_REG_FLAGS] = 0x08,
>> + [BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
>> + [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>> + [BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
>> + [BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
>> + [BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
>> + [BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
>> + [BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
>> + },
>> bq27530_regs[BQ27XXX_REG_MAX] = {
>> [BQ27XXX_REG_CTRL] = 0x00,
>> [BQ27XXX_REG_TEMP] = 0x06,
>> @@ -557,6 +581,15 @@ static enum power_supply_property bq27520g4_props[] = {
>> POWER_SUPPLY_PROP_MANUFACTURER,
>> };
>>
>> +static enum power_supply_property bq27521_props[] = {
>> + POWER_SUPPLY_PROP_STATUS,
>> + POWER_SUPPLY_PROP_PRESENT,
>> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
>> + POWER_SUPPLY_PROP_CURRENT_NOW,
>> + POWER_SUPPLY_PROP_TEMP,
>> + POWER_SUPPLY_PROP_TECHNOLOGY,
>> +};
>> +
>> static enum power_supply_property bq27530_props[] = {
>> POWER_SUPPLY_PROP_STATUS,
>> POWER_SUPPLY_PROP_PRESENT,
>> @@ -671,6 +704,7 @@ static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
>> #define bq27520g2_dm_regs 0
>> #define bq27520g3_dm_regs 0
>> #define bq27520g4_dm_regs 0
>> +#define bq27521_dm_regs 0
>> #define bq27530_dm_regs 0
>> #define bq27531_dm_regs 0
>> #define bq27541_dm_regs 0
>> @@ -717,8 +751,8 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
>> #endif
>>
>> #define BQ27XXX_O_ZERO 0x00000001
>> -#define BQ27XXX_O_OTDC 0x00000002
>> -#define BQ27XXX_O_UTOT 0x00000004
>> +#define BQ27XXX_O_OTDC 0x00000002 /* has OTC/OTD overtemperature flags */
>> +#define BQ27XXX_O_UTOT 0x00000004 /* has OT overtemperature flag */
These should get turned into BIT() macros, but that's not your problem
for this patch,
Acked-by: Andrew F. Davis <afd@xxxxxx>
>> #define BQ27XXX_O_CFGUP 0x00000008
>> #define BQ27XXX_O_RAM 0x00000010
>>
>> @@ -751,6 +785,7 @@ static struct {
>> [BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0 , BQ27XXX_O_OTDC),
>> [BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0 , BQ27XXX_O_OTDC),
>> [BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0 , BQ27XXX_O_OTDC),
>> + [BQ27521] = BQ27XXX_DATA(bq27521, 0 , 0),
>> [BQ27530] = BQ27XXX_DATA(bq27530, 0 , BQ27XXX_O_UTOT),
>> [BQ27531] = BQ27XXX_DATA(bq27531, 0 , BQ27XXX_O_UTOT),
>> [BQ27541] = BQ27XXX_DATA(bq27541, 0 , BQ27XXX_O_OTDC),
>> diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
>> index 0b11ed4..6b25e5f 100644
>> --- a/drivers/power/supply/bq27xxx_battery_i2c.c
>> +++ b/drivers/power/supply/bq27xxx_battery_i2c.c
>> @@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
>> { "bq27520g2", BQ27520G2 },
>> { "bq27520g3", BQ27520G3 },
>> { "bq27520g4", BQ27520G4 },
>> + { "bq27521", BQ27521 },
>> { "bq27530", BQ27530 },
>> { "bq27531", BQ27531 },
>> { "bq27541", BQ27541 },
>> @@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
>> { .compatible = "ti,bq27520g2" },
>> { .compatible = "ti,bq27520g3" },
>> { .compatible = "ti,bq27520g4" },
>> + { .compatible = "ti,bq27521" },
>> { .compatible = "ti,bq27530" },
>> { .compatible = "ti,bq27531" },
>> { .compatible = "ti,bq27541" },
>> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
>> index 9ad7828..6547d30 100644
>> --- a/include/linux/mfd/twl.h
>> +++ b/include/linux/mfd/twl.h
>> @@ -70,6 +70,7 @@ enum twl4030_module_ids {
>> TWL4030_MODULE_INT,
>>
>> TWL5031_MODULE_ACCESSORY,
>> + TWL5031_MODULE_BCC,
>> TWL5031_MODULE_INTERRUPTS,
>>
>> TWL4030_MODULE_LAST,
>> diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
>> index 43194e0..d8d127a 100644
>> --- a/include/linux/power/bq27xxx_battery.h
>> +++ b/include/linux/power/bq27xxx_battery.h
>> @@ -15,6 +15,7 @@ enum bq27xxx_chip {
>> BQ27520G2, /* bq27520G2 */
>> BQ27520G3, /* bq27520G3 */
>> BQ27520G4, /* bq27520G4 */
>> + BQ27521, /* bq27521 */
>> BQ27530, /* bq27530, bq27531 */
>> BQ27531,
>> BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
