> The BCM59056 is a multi-function power management unit used with the > BCM281xx family of SoCs. This series adds an MFD and voltage regulator > driver to support the BCM59056. The bcm28155-ap DT support is updated > to enable use of regulators on the otg and sdhci peripherals. > > Matt Porter (6): > i2c: bcm-kona: register with subsys_initcall > regulator: add bcm59056 pmu DT binding > mfd: add bcm59056 pmu driver > regulator: add bcm59056 regulator driver > ARM: configs: bcm_defconfig: enable bcm59056 regulator support > ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap > > .../devicetree/bindings/regulator/bcm59056.txt | 37 ++ > arch/arm/boot/dts/bcm28155-ap.dts | 41 ++ > arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++ > arch/arm/configs/bcm_defconfig | 7 + > drivers/i2c/busses/i2c-bcm-kona.c | 14 +- > drivers/mfd/Kconfig | 8 + > drivers/mfd/Makefile | 1 + > drivers/mfd/bcm59056.c | 119 ++++++ > drivers/regulator/Kconfig | 8 + > drivers/regulator/Makefile | 1 + > drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++ > include/linux/mfd/bcm59056.h | 35 ++ > 12 files changed, 873 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt > create mode 100644 arch/arm/boot/dts/bcm59056.dtsi > create mode 100644 drivers/mfd/bcm59056.c > create mode 100644 drivers/regulator/bcm59056-regulator.c > create mode 100644 include/linux/mfd/bcm59056.h FYI: Mark's email address is not correct. Not sure where you pulled this one up from, but he doesn't have access to it anymore. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
