Add a regulator driver for the BCM59056 PMU voltage regulators.
The driver supports LDOs and DCDCs in normal mode only. There is
no support for low-power mode or power sequencing.
Signed-off-by: Matt Porter <mporter@xxxxxxxxxx>
Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
---
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++++++++++++++
3 files changed, 454 insertions(+)
create mode 100644 drivers/regulator/bcm59056-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6a79328..e09c9ea5 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -139,6 +139,14 @@ config REGULATOR_AS3722
AS3722 PMIC. This will enable support for all the software
controllable DCDC/LDO regulators.
+config REGULATOR_BCM59056
+ tristate "Broadcom BCM59056 PMU Regulators"
+ depends on MFD_BCM59056
+ help
+ This driver provides support for the voltage regulators on the
+ BCM59056 PMU. This will enable support for the software
+ controllable LDO/Switching regulators.
+
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 979f9dd..bb65035 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_BCM59056) += bcm59056-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
diff --git a/drivers/regulator/bcm59056-regulator.c b/drivers/regulator/bcm59056-regulator.c
new file mode 100644
index 0000000..3fbc1d5
--- /dev/null
+++ b/drivers/regulator/bcm59056-regulator.c
@@ -0,0 +1,445 @@
+/*
+ * Broadcom BCM59056 regulator driver
+ *
+ * Copyright 2014 Linaro Limited
+ * Author: Matt Porter <mporter@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/bcm59056.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/* Register defs */
+#define BCM59056_RFLDOPMCTRL1 0x60
+#define BCM59056_IOSR1PMCTRL1 0x7a
+#define BCM59056_IOSR2PMCTRL1 0x7c
+#define BCM59056_CSRPMCTRL1 0x7e
+#define BCM59056_SDSR1PMCTRL1 0x82
+#define BCM59056_SDSR2PMCTRL1 0x86
+#define BCM59056_MSRPMCTRL1 0x8a
+#define BCM59056_VSRPMCTRL1 0x8e
+#define BCM59056_REG_ENABLE BIT(7)
+
+#define BCM59056_RFLDOCTRL 0x96
+#define BCM59056_CSRVOUT1 0xc0
+#define BCM59056_LDO_VSEL_MASK GENMASK(5, 3)
+#define BCM59056_SR_VSEL_MASK GENMASK(5, 0)
+
+/* LDO regulator IDs */
+#define BCM59056_REG_RFLDO 0
+#define BCM59056_REG_CAMLDO1 1
+#define BCM59056_REG_CAMLDO2 2
+#define BCM59056_REG_SIMLDO1 3
+#define BCM59056_REG_SIMLDO2 4
+#define BCM59056_REG_SDLDO 5
+#define BCM59056_REG_SDXLDO 6
+#define BCM59056_REG_MMCLDO1 7
+#define BCM59056_REG_MMCLDO2 8
+#define BCM59056_REG_AUDLDO 9
+#define BCM59056_REG_MICLDO 10
+#define BCM59056_REG_USBLDO 11
+#define BCM59056_REG_VIBLDO 12
+
+/* DCDC regulator IDs */
+#define BCM59056_REG_CSR 13
+#define BCM59056_REG_IOSR1 14
+#define BCM59056_REG_IOSR2 15
+#define BCM59056_REG_MSR 16
+#define BCM59056_REG_SDSR1 17
+#define BCM59056_REG_SDSR2 18
+#define BCM59056_REG_VSR 19
+
+#define BCM59056_NUM_REGS 20
+
+#define BCM59056_REG_IS_LDO(n) (n < BCM59056_REG_CSR)
+
+struct bcm59056_board {
+ struct regulator_init_data *bcm59056_pmu_init_data[BCM59056_NUM_REGS];
+};
+
+/* LDO group A: supported voltages in microvolts */
+static const unsigned int ldo_a_table[] = {
+ 1200000, 1800000, 2500000, 2700000, 2800000,
+ 2900000, 3000000, 3300000,
+};
+
+/* LDO group C: supported voltages in microvolts */
+static const unsigned int ldo_c_table[] = {
+ 3100000, 1800000, 2500000, 2700000, 2800000,
+ 2900000, 3000000, 3300000,
+};
+
+/* DCDC group CSR: supported voltages in microvolts */
+static const struct regulator_linear_range dcdc_csr_ranges[] = {
+ REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
+ REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000),
+ REGULATOR_LINEAR_RANGE(900000, 56, 63, 0),
+};
+
+/* DCDC group IOSR1: supported voltages in microvolts */
+static const struct regulator_linear_range dcdc_iosr1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000),
+ REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0),
+ REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0),
+ REGULATOR_LINEAR_RANGE(900000, 54, 63, 0),
+};
+
+/* DCDC group SDSR1: supported voltages in microvolts */
+static const struct regulator_linear_range dcdc_sdsr1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000),
+ REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0),
+ REGULATOR_LINEAR_RANGE(900000, 52, 63, 0),
+};
+
+struct bcm59056_info {
+ const char *name;
+ const char *vin_name;
+ u8 n_voltages;
+ const unsigned int *volt_table;
+ u8 n_linear_ranges;
+ const struct regulator_linear_range *linear_ranges;
+};
+
+#define BCM59056_REG_TABLE(_name, _table) \
+ { \
+ .name = #_name, \
+ .n_voltages = ARRAY_SIZE(_table), \
+ .volt_table = _table, \
+ }
+
+#define BCM59056_REG_RANGES(_name, _ranges) \
+ { \
+ .name = #_name, \
+ .n_linear_ranges = ARRAY_SIZE(_ranges), \
+ .linear_ranges = _ranges, \
+ }
+
+static struct bcm59056_info bcm59056_regs[] = {
+ BCM59056_REG_TABLE(rfldo, ldo_a_table),
+ BCM59056_REG_TABLE(camldo1, ldo_c_table),
+ BCM59056_REG_TABLE(camldo2, ldo_c_table),
+ BCM59056_REG_TABLE(simldo1, ldo_a_table),
+ BCM59056_REG_TABLE(simldo2, ldo_a_table),
+ BCM59056_REG_TABLE(sdldo, ldo_c_table),
+ BCM59056_REG_TABLE(sdxldo, ldo_a_table),
+ BCM59056_REG_TABLE(mmcldo1, ldo_a_table),
+ BCM59056_REG_TABLE(mmcldo2, ldo_a_table),
+ BCM59056_REG_TABLE(audldo, ldo_a_table),
+ BCM59056_REG_TABLE(micldo, ldo_a_table),
+ BCM59056_REG_TABLE(usbldo, ldo_a_table),
+ BCM59056_REG_TABLE(vibldo, ldo_c_table),
+ BCM59056_REG_RANGES(csr, dcdc_csr_ranges),
+ BCM59056_REG_RANGES(iosr1, dcdc_iosr1_ranges),
+ BCM59056_REG_RANGES(iosr2, dcdc_iosr1_ranges),
+ BCM59056_REG_RANGES(msr, dcdc_iosr1_ranges),
+ BCM59056_REG_RANGES(sdsr1, dcdc_sdsr1_ranges),
+ BCM59056_REG_RANGES(sdsr2, dcdc_iosr1_ranges),
+ BCM59056_REG_RANGES(vsr, dcdc_iosr1_ranges),
+};
+
+struct bcm59056_reg {
+ struct regulator_desc *desc;
+ struct bcm59056 *mfd;
+ struct regulator_dev **rdev;
+ struct bcm59056_info **info;
+};
+
+static int bcm59056_get_vsel_register(int id)
+{
+ if (BCM59056_REG_IS_LDO(id))
+ return BCM59056_RFLDOCTRL + id;
+ else
+ return BCM59056_CSRVOUT1 + (id - BCM59056_REG_CSR) * 3;
+}
+
+static int bcm59056_get_enable_register(int id)
+{
+ int reg = 0;
+
+ if (BCM59056_REG_IS_LDO(id))
+ reg = BCM59056_RFLDOPMCTRL1 + id * 2;
+ else
+ switch (id) {
+ case BCM59056_REG_CSR:
+ reg = BCM59056_CSRPMCTRL1;
+ break;
+ case BCM59056_REG_IOSR1:
+ reg = BCM59056_IOSR1PMCTRL1;
+ break;
+ case BCM59056_REG_IOSR2:
+ reg = BCM59056_IOSR2PMCTRL1;
+ break;
+ case BCM59056_REG_MSR:
+ reg = BCM59056_MSRPMCTRL1;
+ break;
+ case BCM59056_REG_SDSR1:
+ reg = BCM59056_SDSR1PMCTRL1;
+ break;
+ case BCM59056_REG_SDSR2:
+ reg = BCM59056_SDSR2PMCTRL1;
+ break;
+ };
+
+ return reg;
+}
+
+static unsigned int bcm59056_get_mode(struct regulator_dev *dev)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int bcm59056_set_mode(struct regulator_dev *dev, unsigned int mode)
+{
+ if (mode == REGULATOR_MODE_NORMAL)
+ return 0;
+ else
+ return -EINVAL;
+}
+
+static struct regulator_ops bcm59056_ops_ldo = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_mode = bcm59056_set_mode,
+ .get_mode = bcm59056_get_mode,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+};
+
+static struct regulator_ops bcm59056_ops_dcdc = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_mode = bcm59056_set_mode,
+ .get_mode = bcm59056_get_mode,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+};
+
+#define BCM59056_MATCH(_name, _id) \
+ { \
+ .name = #_name, \
+ .driver_data = (void *)&bcm59056_regs[BCM59056_REG_##_id], \
+ }
+
+static struct of_regulator_match bcm59056_matches[] = {
+ BCM59056_MATCH(rfldo, RFLDO),
+ BCM59056_MATCH(camldo1, CAMLDO1),
+ BCM59056_MATCH(camldo2, CAMLDO2),
+ BCM59056_MATCH(simldo1, SIMLDO1),
+ BCM59056_MATCH(simldo2, SIMLDO2),
+ BCM59056_MATCH(sdldo, SDLDO),
+ BCM59056_MATCH(sdxldo, SDXLDO),
+ BCM59056_MATCH(mmcldo1, MMCLDO1),
+ BCM59056_MATCH(mmcldo2, MMCLDO2),
+ BCM59056_MATCH(audldo, AUDLDO),
+ BCM59056_MATCH(micldo, MICLDO),
+ BCM59056_MATCH(usbldo, USBLDO),
+ BCM59056_MATCH(vibldo, VIBLDO),
+ BCM59056_MATCH(csr, CSR),
+ BCM59056_MATCH(iosr1, IOSR1),
+ BCM59056_MATCH(iosr2, IOSR2),
+ BCM59056_MATCH(msr, MSR),
+ BCM59056_MATCH(sdsr1, SDSR1),
+ BCM59056_MATCH(sdsr2, SDSR2),
+ BCM59056_MATCH(vsr, VSR),
+};
+
+static struct bcm59056_board *bcm59056_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **bcm59056_reg_matches)
+{
+ struct bcm59056_board *data;
+ struct device_node *np, *regulators;
+ struct of_regulator_match *matches = bcm59056_matches;
+ int count = ARRAY_SIZE(bcm59056_matches);
+ int idx = 0;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "failed to allocate regulator board data\n");
+ return NULL;
+ }
+
+ np = of_node_get(pdev->dev.parent->of_node);
+ regulators = of_get_child_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return NULL;
+ }
+
+ ret = of_regulator_match(&pdev->dev, regulators, matches, count);
+ of_node_put(regulators);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+ ret);
+ return NULL;
+ }
+
+ *bcm59056_reg_matches = matches;
+
+ for (idx = 0; idx < count; idx++) {
+ if (!matches[idx].init_data || !matches[idx].of_node)
+ continue;
+
+ data->bcm59056_pmu_init_data[idx] = matches[idx].init_data;
+ }
+
+ return data;
+}
+
+static int bcm59056_probe(struct platform_device *pdev)
+{
+ struct bcm59056 *bcm59056 = dev_get_drvdata(pdev->dev.parent);
+ struct bcm59056_board *pmu_data = NULL;
+ struct bcm59056_reg *pmu;
+ struct regulator_config config = { };
+ struct bcm59056_info *info;
+ struct regulator_init_data *reg_data;
+ struct regulator_dev *rdev;
+ struct of_regulator_match *bcm59056_reg_matches = NULL;
+ int i;
+
+ if (bcm59056->dev->of_node)
+ pmu_data = bcm59056_parse_dt_reg_data(pdev,
+ &bcm59056_reg_matches);
+
+ if (!pmu_data) {
+ dev_err(&pdev->dev, "Platform data not found\n");
+ return -EINVAL;
+ }
+
+ pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
+ if (!pmu) {
+ dev_err(&pdev->dev, "Memory allocation failed for pmu\n");
+ return -ENOMEM;
+ }
+
+ pmu->mfd = bcm59056;
+
+ platform_set_drvdata(pdev, pmu);
+
+ pmu->desc = devm_kzalloc(&pdev->dev, BCM59056_NUM_REGS *
+ sizeof(struct regulator_desc), GFP_KERNEL);
+ if (!pmu->desc) {
+ dev_err(&pdev->dev, "Memory alloc fails for desc\n");
+ return -ENOMEM;
+ }
+
+ pmu->info = devm_kzalloc(&pdev->dev, BCM59056_NUM_REGS *
+ sizeof(struct bcm59056_info *), GFP_KERNEL);
+ if (!pmu->info) {
+ dev_err(&pdev->dev, "Memory alloc fails for info\n");
+ return -ENOMEM;
+ }
+
+ pmu->rdev = devm_kzalloc(&pdev->dev, BCM59056_NUM_REGS *
+ sizeof(struct regulator_dev *), GFP_KERNEL);
+ if (!pmu->rdev) {
+ dev_err(&pdev->dev, "Memory alloc fails for rdev\n");
+ return -ENOMEM;
+ }
+
+ info = bcm59056_regs;
+
+ for (i = 0; i < BCM59056_NUM_REGS; i++, info++) {
+ reg_data = pmu_data->bcm59056_pmu_init_data[i];
+
+ /*
+ * Regulator API handles empty constraints but not NULL
+ * constraints
+ */
+ if (!reg_data)
+ continue;
+
+ /* Register the regulators */
+ pmu->info[i] = info;
+
+ pmu->desc[i].name = info->name;
+ pmu->desc[i].supply_name = info->vin_name;
+ pmu->desc[i].id = i;
+ pmu->desc[i].volt_table = info->volt_table;
+ pmu->desc[i].n_voltages = info->n_voltages;
+ pmu->desc[i].linear_ranges = info->linear_ranges;
+ pmu->desc[i].n_linear_ranges = info->n_linear_ranges;
+
+ if (BCM59056_REG_IS_LDO(i)) {
+ pmu->desc[i].ops = &bcm59056_ops_ldo;
+ pmu->desc[i].vsel_mask = BCM59056_LDO_VSEL_MASK;
+ } else {
+ pmu->desc[i].ops = &bcm59056_ops_dcdc;
+ pmu->desc[i].vsel_mask = BCM59056_SR_VSEL_MASK;
+ }
+
+ pmu->desc[i].vsel_reg = bcm59056_get_vsel_register(i);
+ pmu->desc[i].enable_is_inverted = true;
+ pmu->desc[i].enable_mask = BCM59056_REG_ENABLE;
+ pmu->desc[i].enable_reg = bcm59056_get_enable_register(i);
+ pmu->desc[i].type = REGULATOR_VOLTAGE;
+ pmu->desc[i].owner = THIS_MODULE;
+
+ config.dev = bcm59056->dev;
+ config.init_data = reg_data;
+ config.driver_data = pmu;
+ config.regmap = bcm59056->regmap;
+
+ if (bcm59056_reg_matches)
+ config.of_node = bcm59056_reg_matches[i].of_node;
+
+ rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(bcm59056->dev,
+ "failed to register %s regulator\n",
+ pdev->name);
+ return PTR_ERR(rdev);
+ }
+
+ pmu->rdev[i] = rdev;
+ }
+
+ return 0;
+}
+
+static struct platform_driver bcm59056_regulator_driver = {
+ .driver = {
+ .name = "bcm59056-pmu",
+ .owner = THIS_MODULE,
+ },
+ .probe = bcm59056_probe,
+};
+
+static int __init bcm59056_regulator_init(void)
+{
+ return platform_driver_register(&bcm59056_regulator_driver);
+}
+subsys_initcall(bcm59056_regulator_init);
+
+static void __exit bcm59056_regulator_exit(void)
+{
+ platform_driver_unregister(&bcm59056_regulator_driver);
+}
+module_exit(bcm59056_regulator_exit);
+
+MODULE_AUTHOR("Matt Porter <mporter@xxxxxxxxxx>");
+MODULE_DESCRIPTION("BCM59056 voltage regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bcm59056-regulator");
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
