Add a DT binding for the BCM59056 PMU. The binding inherits from
the generic regulator bindings.
Signed-off-by: Matt Porter <mporter@xxxxxxxxxx>
Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
---
.../devicetree/bindings/regulator/bcm59056.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
diff --git a/Documentation/devicetree/bindings/regulator/bcm59056.txt b/Documentation/devicetree/bindings/regulator/bcm59056.txt
new file mode 100644
index 0000000..bf6b633
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/bcm59056.txt
@@ -0,0 +1,37 @@
+BCM59056 Power Management Unit
+
+Required properties:
+- compatible: "brcm,bcm59056"
+- reg: I2C slave address
+- interrupts: interrupt for the PMU. Generic interrupt client node bindings
+ are described in interrupt-controller/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Generic regulator bindings
+ are described in regulator/regulator.txt.
+
+ The valid regulator-compatible values are:
+ rfldo, camldo1, camldo2, simldo1, simlso2, sdldo, sdxldo,
+ mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+ csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr
+
+Example:
+ pmu: bcm59056@8 {
+ compatible = "brcm,bcm59056";
+ reg = <0x08>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfldo_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "rfldo";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ...
+ };
+ };
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
