Hi Rob! Thanks for all the effort - I shall incorporate those changes into V2. > s/Microcip/Microchip/ > s/_/-/ > >> + 0 = Start of Frame output >> + default: 10 >> + - microchip,clock_div = <1|2>: internal clock divider - default 1 >> + - microchip,gpio_opendrain: gpio (int0,1) in open drain mode >> + instead of default push/pull >> + - microchip,int_opendrain: int pin in open drain mode >> + instead of default push/pull > > IIRC, we have a standard property for this. Would you know what that could be - I did a quick search for standard properties, but could not find a definitive list… The only thing I found in: Documentation/devicetree/bindings/w1/w1-gpio.txt is: linux,open-drain But there is also: nvidia,open-drain open_drain open-drain drive-open-drain (pinctrl) st,irq-open-drain Only the last is specific to the interrupt line and none to the other GPIOs of the chip (txcan, GPIO) - and each can get set differently. So how shall I implement that? Thanks, Martin-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
