Hi Palmer,
On Mon, Nov 20, 2017 at 11:50:22AM -0800, Palmer Dabbelt wrote:
> RISC-V doesn't currently specify a mechanism for enabling or disabling
> CPUs. Instead, we assume that all CPUs are enabled on boot, and if
> someone wants to save power we instead put a CPU to sleep via a WFI
> loop.
>
> This patch adds "enable-method" to the RISC-V CPU binding, which
> currently only has the value "none". This allows us to change the
> enable method in the future.
I think you might want to be a bit more explicit about what this means,
and this could do with a better name, as "none" sounds like the CPU is
unusable, rather than it having been placed within the kernel already by
the FW/bootloader (which IIUC is what happens currently).
As previosuly commented, I also really think you'll want to define a
simple boot protocol (like PPC spin-table) whereby the kernel can bring
each CPU into the kernel independently. That will save you a lot of pain
in future with things like kexec, suspend/resume, etc.
For arm64 we had a spin-table clone (implemented in our boot-wrapper
firmware) that allowed us to bring CPUs into the kernel explicitly.
However, we made the mistake of allowing CPUs to share a mailbox, and we
couldn't tell how many CPUs were stuck in the kernel at any point in
time (rendering kexec, suspend, etc impossible).
Thanks,
Mark.
> CC: Mark Rutland <mark.rutland@xxxxxxx>
> Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/riscv/cpus.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt
> index adf7b7af5dc3..dd9e1ae197e2 100644
> --- a/Documentation/devicetree/bindings/riscv/cpus.txt
> +++ b/Documentation/devicetree/bindings/riscv/cpus.txt
> @@ -82,6 +82,11 @@ described below.
> Value type: <string>
> Definition: Contains the RISC-V ISA string of this hart. These
> ISA strings are defined by the RISC-V ISA manual.
> + - cpu-enable-method:
> + Usage: required
> + Value type: <stringlist>
> + Definition: Must be one of
> + "none": This CPU's state cannot be changed.
>
> Example: SiFive Freedom U540G Development Kit
> ---------------------------------------------
> @@ -105,6 +110,7 @@ Linux is allowed to run on.
> reg = <0>;
> riscv,isa = "rv64imac";
> status = "disabled";
> + enable-method = "none";
> L10: interrupt-controller {
> #interrupt-cells = <1>;
> compatible = "riscv,cpu-intc";
> @@ -130,6 +136,7 @@ Linux is allowed to run on.
> reg = <1>;
> riscv,isa = "rv64imafdc";
> status = "okay";
> + enable-method = "none";
> tlb-split;
> L13: interrupt-controller {
> #interrupt-cells = <1>;
> --
> 2.13.6
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
