[PATCH v3 5/5] dt-bindings: pinctrl: deprecate 'microchip,irq-active-high' property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The irq output polarity can be determined from the 'interrupts'
configuration. So 'microchip,irq-active-high' is not required.

Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index a5a8322..72bac30 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -58,8 +58,8 @@ Optional device specific properties:
         occurred on. If it is not set, the interrupt are only generated for the
         bank they belong to.
         On devices with only one interrupt output this property is useless.
-- microchip,irq-active-high: Sets the INTPOL flag in the IOCON register. This
-        configures the IRQ output polarity as active high.
+- microchip,irq-active-high: (DEPRECATED)
+        irq polarity is determined from the 'interrupts' configuration
 
 Example I2C (with interrupt):
 gpiom1: gpio@20 {
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux