The mcp23s08 series device can be configured for wired and interrupts
using an external pull-up and open drain output via the IOCON_ODR bit.
And "drive-open-drain" property to enable this.
Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
---
drivers/pinctrl/pinctrl-mcp23s08.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index cc1f9f6..8ff9b77 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -772,6 +772,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
int status, ret;
bool mirror = false;
bool irq_active_high = false;
+ bool open_drain = false;
mutex_init(&mcp->lock);
@@ -867,10 +868,11 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
"microchip,irq-active-high");
mirror = device_property_read_bool(dev, "microchip,irq-mirror");
+ open_drain = device_property_read_bool(dev, "drive-open-drain");
}
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror ||
- irq_active_high) {
+ irq_active_high || open_drain) {
/* mcp23s17 has IOCON twice, make sure they are in sync */
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
status |= IOCON_HAEN | (IOCON_HAEN << 8);
@@ -882,6 +884,9 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
if (mirror)
status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
+ if (open_drain)
+ status |= IOCON_ODR | (IOCON_ODR << 8);
+
if (type == MCP_TYPE_S18 || type == MCP_TYPE_018)
status |= IOCON_INTCC | (IOCON_INTCC << 8);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
