On Wed, Nov 8, 2017 at 1:42 AM, Sergey Matyukevich <geomatsi@xxxxxxxxx> wrote: > Hi, > >> >>> > Did you try to boot from sdcard ? I am not able to boot my board from >> >>> > sd-card without this change. As I mentioned earlier in my email >> >>> > to buildroot mailing list, with mmc debug enabled I see that mmc >> >>> > tries to init sd-card when I remove it from the slot. >> >>> > >> >>> > Maybe there is a minor differences between h/w versions or batches ? >> >>> > What is you board version ? I tested on board v1.0. >> >>> >> >>> Looking at the schematics, it definitely looks like it's active low. >> >> >> >> Is it ok to merge it then ? Or using 'cd-inverted' property >> >> is the preferable option ? >> > >> > W/o any change mainline works unstable for me, it wasn't booting >> > at-all[1] did you find the same? >> > >> > Even tried with active LOW and cd-inverted. >> > >> > [1] https://paste.ubuntu.com/25909064/ >> >> Look like something broken for H5 and A64 between v4.14-rc8 to latest > > Both 4.13.7 and 4.14-rc8 (synched today) kernels worked fine for me. > DTS behavior is all the same: I've tried fresh sync [2] but still see the issue, can you check the Image size of log(suspecting on that area) [2] https://paste.ubuntu.com/25916951/ thanks! -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
