Re: [PATCH 1/2] arm64: dts: orange-pi-zero-plus2: fix sdcard detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Nov 7, 2017 at 1:12 PM, Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
> On Mon, Nov 6, 2017 at 9:43 PM, Sergey Matyukevich <geomatsi@xxxxxxxxx> wrote:
>> Hello Maxime,
>>
>>> > > > The sdcard detect pin on orange-pi-zero-plus2 is pulled up.
>>> > > > Fix cd-gpio description to enable sdcard detect.
>>> > > >
>>> > > > Signed-off-by: Sergey Matyukevich <geomatsi@xxxxxxxxx>
>>> > > > ---
>>> > > >  arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +-
>>> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
>>> > > >
>>> > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
>>> > > > index b6b7a561df8c..a42fd79a62a3 100644
>>> > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
>>> > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
>>> > > > @@ -71,7 +71,7 @@
>>> > > >         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
>>> > > >         vmmc-supply = <&reg_vcc3v3>;
>>> > > >         bus-width = <4>;
>>> > > > -       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
>>> > > > +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
>>> > >
>>> > > Was able to detect and do mount with existing dts
>>> >
>>> > Did you try to boot from sdcard ? I am not able to boot my board from
>>> > sd-card without this change. As I mentioned earlier in my email
>>> > to buildroot mailing list, with mmc debug enabled I see that mmc
>>> > tries to init sd-card when I remove it from the slot.
>>> >
>>> > Maybe there is a minor differences between h/w versions or batches ?
>>> > What is you board version ? I tested on board v1.0.
>>>
>>> Looking at the schematics, it definitely looks like it's active low.
>>
>> Is it ok to merge it then ? Or using 'cd-inverted' property
>> is the preferable option ?
>
> W/o any change mainline works unstable for me, it wasn't booting
> at-all[1] did you find the same?
>
> Even tried with active LOW and cd-inverted.
>
> [1] https://paste.ubuntu.com/25909064/

Look like something broken for H5 and A64 between v4.14-rc8 to latest

thanks!
-- 
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux