On Sat, Nov 4, 2017 at 9:52 PM, Sergey Matyukevich <geomatsi@xxxxxxxxx> wrote: >> > > The sdcard detect pin on orange-pi-zero-plus2 is pulled up. >> > > Fix cd-gpio description to enable sdcard detect. >> > > >> > > Signed-off-by: Sergey Matyukevich <geomatsi@xxxxxxxxx> >> > > --- >> > > arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +- >> > > 1 file changed, 1 insertion(+), 1 deletion(-) >> > > >> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts >> b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts >> > > index b6b7a561df8c..a42fd79a62a3 100644 >> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts >> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts >> > > @@ -71,7 +71,7 @@ >> > > pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; >> > > vmmc-supply = <®_vcc3v3>; >> > > bus-width = <4>; >> > > - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; >> > > + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; >> > >> > Was able to detect and do mount with existing dts >> >> Did you try to boot from sdcard ? I am not able to boot my board from >> sd-card without this change. As I mentioned earlier in my email >> to buildroot mailing list, with mmc debug enabled I see that mmc >> tries to init sd-card when I remove it from the slot. >> >> Maybe there is a minor differences between h/w versions or batches ? >> What is you board version ? I tested on board v1.0. >> >> >> I'm using same v1.0 > > Ok, lets skip this patch for now. > > I will double check v1.0 schematics and my board behavior. > Though I see that mmc0 dts fragment in u-boot for this board > also differs from the current kernel one: it uses 'cd-inverted' property. Can you shared the hang log.. look like I've seen boot issue with Latest Linux and U-Boot. [ 1.348668] ALSA device list: [ 1.351649] No soundcards found. [ 1.355388] Waiting for root device /dev/mmcblk0p2... [ 1.371117] mmc1: new high speed MMC card at address 0001 [ 1.376947] mmcblk1: mmc1:0001 8WPD3R 7.28 GiB [ 1.381623] mmcblk1boot0: mmc1:0001 8WPD3R partition 1 4.00 MiB [ 1.387682] mmcblk1boot1: mmc1:0001 8WPD3R partition 2 4.00 MiB [ 1.395036] mmcblk1: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 > [ 1.402542] mmcblk1: p1 size 6873088 extends beyond EOD, truncated << hang..>> thanks! -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
