On Tue, Jan 28, 2014 at 01:39:12AM +0100, Sebastian Hesselbarth wrote: > This patch set is one required step for Dove to hop into mach-mvebu. > Until now, pinctrl-dove was hardcoding some registers that do not > directly belong to MPP core registers. This is not compatible with > what we want for mach-mvebu. Hi Sebastian I think there might be something wrong here.... /debug/pinctrl/f1010000.pinctrl/pinconf-groups used to contain: Pin config settings per pin group Format: group (name): configs 0 (mpp0):current: spi(cs), available = [ gpio(io) nand(io2) ] 1 (mpp1):current: spi(mosi), available = [ gpo(o) nand(io3) ] 2 (mpp2):current: spi(sck), available = [ gpo(o) nand(io4) ] 3 (mpp3):current: spi(miso), available = [ gpo(o) nand(io5) ] 4 (mpp4):current: sata1(act), available = [ gpio(io) nand(io6) uart0(rxd) lcd(hsync) ] 5 (mpp5):current: sata0(act), available = [ gpo(o) nand(io7) uart0(txd) lcd(vsync) ] 6 (mpp6):current: sysrst(out), available = [ spi(mosi) ] ... It now has: Pin config settings per pin group Format: group (name): configs 0 (mpp0):current: gpio(io), available = [ nand(io2) spi(cs) ] 1 (mpp1):current: gpo(o), available = [ nand(io3) spi(mosi) ] 2 (mpp2):current: gpo(o), available = [ nand(io4) spi(sck) ] 3 (mpp3):current: gpo(o), available = [ nand(io5) spi(miso) ] 4 (mpp4):current: gpio(io), available = [ nand(io6) uart0(rxd) sata1(act) lcd(hsync) ] 5 (mpp5):current: gpo(o), available = [ nand(io7) uart0(txd) sata0(act) lcd(vsync) ] 6 (mpp6):current: UNKNOWN, available = [ sysrst(out) spi(mosi) ] The device i'm testing on does use spi and sata, so i would say the old contents was correct and the new is wrong. Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html