From: Shawn Guo <shawn.guo@xxxxxxxxxx> It adds device tree bindings and driver support for Combo PHY device which can be found on HiSilicon STB SoCs. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Jianguo Sun (2): dt-bindings: add bindings doc for hi3798cv200 combphy phy: add combo phy driver for HiSilicon STB SoCs .../bindings/phy/phy-hi3798cv200-combphy.txt | 50 ++++ drivers/phy/hisilicon/Kconfig | 9 + drivers/phy/hisilicon/Makefile | 1 + drivers/phy/hisilicon/phy-histb-combphy.c | 253 +++++++++++++++++++++ 4 files changed, 313 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt create mode 100644 drivers/phy/hisilicon/phy-histb-combphy.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
